Looking For The Replacement Reservoir Gasket For My Tiedown 70e Actuator
Updated 09/12/2025 | Published 08/28/2025
Question:
Iam looki g for the gasket on top of the master cylinder on a tiedown engineering brake actuator model 70e Thanks
asked by: Arthur T
0
Expert Reply:
Hey Arthur,
We do not carry that individual reservoir cap gasket you are referring to. We would carry a full actuator replacement, but if you really are looking for just that part I would recommend reaching out to the manufacturer to see if they are able to source that for you.
Something like the Dexter # 099-175-20 is what we would have as a replacement.
expert reply by:
Nick S
0
Product Page this Question was Asked From
Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Continue Researching
- Q&A: Tie Down Model 70 Surge Brake Actuator Replacement Recommendation
- Q&A: Replacement Bolt-On Disc Brake Actuator for Tie Down 70E
- Q&A: Actuator Replacement Recommendation for Tie Down Model 70
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: What Size and Grade Mounting Hardware for the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Q&A: Can the Titan Aero 6000 Surge Brake Actuator Be Repaired Or Should It Just Be Replaced
- Q&A: What is the Best Disc Brake Actuator for a Four Winns Horizon 190 Boat Trailer
- Q&A: Does The Replacement Mounting Bracket for Kodiak Disc Brake Caliper # KCMB10HRD Come With Hardware
- Article: Trailer Wiring Diagrams
- Article: Best Boat Trailer Jacks
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Measure a Trailer Axle
Nick S.
9/12/2025
Hey Arthur, did you have any luck reaching out to the manufacturer for the gasket you need? I'm eager to know because it could help others in a similar situation.