Will PullRite Adapter Rails for 5th Wheel Hitch Work With SuperGlide 4400

Question

Question:

Will the PUL69RR adapt to the old style 4400 model pull rite hitch?

asked by: Matt M

0

Expert Reply:

Hey Matt! The SuperGlide 4400 is the Traditional Series that uses specific rails. The Adapter Rails for 5th Wheel Hitch - GM Towing Prep Package # PUL69RR installs in your puck system and adds industry standard rails. For the 4400 to be compatible you will also need the PullRite Adapter Kit for Mounting Traditional SuperGlide Hitches to ISR or Gooseneck Rail Systems # PUL98VR. The adapter kit makes the 4400 ISR compatible so it will fit any standard rail system.

expert reply by: Robin H

0

PullRite Adapter Kit
(click to enlarge)

Robin H.

9/12/2025

Hey Matt, did the adapter kit work out for your SuperGlide 4400 hitch? I'm asking because it could help others with similar setups.

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 4

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 5

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 6

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 7

Welcome back Anthony! The Curt parts you were looking at are compatible with your Silverado and each other but I recommend the B&W Companion OEM 5th Wheel Hitch w/ Slider item #BWRVK3775. The B&W Companion w/ Slider item #BWRVK3775 is one of…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 10

Hi Frank; the #RP74FR (68204) and #SWW-06 look different because they are a little different. The #RP74FR is only designed to work with the 68220 and 69220. If you have a different Sidewinder this wedge will not fit. It also fits a wider range of 5th…

view full answer...

Answer 11

Hey Paul! The PullRite SuperGlide #PUL43RR (2714) and #PUL73RR (2914) do weigh the same. The main difference is the capacity, which is going to come from the base of the 5th wheel hitch. Since your 2027 Keystone Cougar 316RLS has a GVWR of 12,900 lbs…

view full answer...

Answer 12

Hey Mark, welcome to the fifth wheel community! I'd be more than happy to help you. So a fifth wheel hitch will sit lower than the top of the truck bed rails so you wouldn't have to remove the head of the hitch to close the cover BUT the…

view full answer...

Will PullRite Adapter Rails for 5th Wheel Hitch Work With SuperGlide 4400

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching