What 7 Way will Work for the Bed of My 1996 Dodge Ram Pickup with Factory 3 and 4 Pin?
Updated 09/13/2025 | Published 08/24/2025
Question:
Hi I have a 7 pin plug bed adapter that says its for a 96 dodge. My issue is the adapter is a single 7 pin connector where the truck has a 4 pin and a 3 pin. Is there an adapter that will go from the 3 and 4 pin to a single 7 pin so I can make the bed connection work or do I need to install new connectors on the truck and harness for the adapter
asked by: Cris
Expert Reply:
Hello Cris,
The Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long # C56071 is designed to pigtail into your 1996 Dodges wiring behind your trailer connector. I would look behind the 3 pin and 4 pin to see how it is hooked up, you should see the connectors that the # C56071 will plug into. I attached a picture of the connectors.
If this is not correct, please send me pictures of the 3 and 4 pin, and how it is wired behind, please make sure the pictures of the connectors are nice a visible. You can send the pictures by responding directly to the email you receive.
What are you going to be towing that you need to add the 7 way to the bed?
(click to enlarge)
Product Page this Question was Asked From
Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long
- Custom Fit Vehicle Wiring
- 5th Wheel and Gooseneck Wiring
- Vehicle End Connector
- 7 Blade
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended 5th Wheel Rails and Brackets for a 2010 Ram 3500
- Q&A: Recommended Locking Hitch Pin for 2022 Toyota Tacoma
- Q&A: Pros and Cons of 5th Wheel Hitch With a Slide Bar Jaw Versus a Dual Jaw Hitch
- Q&A: Curt Hitch that Fits 1999 Dodge Ram 2500
- Q&A: Camper Tie-Downs for 2006 Dodge Ram 3500 Dually
- Q&A: Weight Distribution Recommendation for 2004 Ford F-250 Towing 11k Trailer
- Q&A: 5th Wheel Rails And Brackets For A 2019 Ram 1500 Classic With 5-1/2 Foot Bed
- Article: Trailer Wiring Diagrams
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Lighting Requirements
- Article: My Trailer Hitch Doesn't Fit
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Brake Controller Installation: Starting from Scratch
Kate F.
9/12/2025
Hey Cris, Did you have a chance to check how the 3 pin and 4 pin are hooked up behind your truck's trailer connector? If you're still looking for a solution, I'm happy to help.