bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Performance Chip Help Hub
  4. Performance Chip Q&As
  5. Question 81704
Q & A Icon

Toggle Switch Positions on the Edge EZ Programmer 30204  

Updated 11/20/2024 | Published 06/18/2014

Question:

my toggle switch has nothing on it how do i tell what position it is in

0

Expert Reply:

The toggle switch on the Edge EZ module # EP30204 does not come with labels. There is a little tab on one side of the base of the toggle switch. The position closest to that tab is level three. Forward one setting is level two. And all the way to the opposite end of the tab is level one. Take a look at the picture I have included that shows the positions.

expert reply by:
0
Michael H
click to enlarge
James profile picture

James

4/9/2020

What if there is no tab? Mine doesn’t even have a tab on it at all

Chris R. profile picture
Etrailer Expert

Chris R.

4/11/2020

Do you notice anything at all that differentiates one side of the switch base from the other? Is there a groove or anything that may have been where the tab was at one time located? If not, it'll be difficult to identify the switch settings based on visual cues alone - your best route would be to simply look for differences in actual performance between the three switch settings, and label (or just mentally note) the toggle accordingly.
Blake A. profile picture

Blake A.

11/20/2024

Hello I was just wondering if there may be a way to order just the switch I’ve got the edge ez

Bryce D. profile picture

Bryce D.

11/20/2024

@BlakeA Unfortunately Blake, it does not look like that part is available for replacement.
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on Performance Chip

Videos

Help Articles

Expert Answers

Others Also Watched
Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
Pacbrake Alpha Air Bag Suspension Kit Review and Comparison
Choosing the Right Vehicle Suspension Upgrades
A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
Feature Review - Big Truck Big RV Trailer Jack Foot Scale with Tongue Weight Gauge
What to Know About the Curt TriFlex NEXT Trailer Brake Controller
Others Also Read
Trailer Wiring Diagrams
Brake Controller 7- and 4-Way Installation Kit (ETBC7)
How to Measure for Trailer Hitch Drop
Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
How to Measure Your Trailer Wheel Bolt Pattern
5 Things to Know About Weight Distribution Hitches
How to Choose the Right Trailer Hitch Class
4 Steps to Choosing Your 5th Wheel Pin Box
Brake Controller Installation: Starting from Scratch
The 5 Best Trailer Drop Hitches You Can Buy
30-Amp and 50-Amp RV Service: What's the Difference?
Choosing the Right Suspension Kit for Your Truck and Trailer
Others Also Asked
Does the Edge EZ Tuner #EZD1000A Come with a Switch to Adjust Power Levels

If you check out the picture I attached you will see that the switch you referenced is included with the Edge EZ part #EZD1000A for your 2001 Dodge Ram. You will also see brief explanations on each of the components that comes with the kit. For more…

view full answer...
How to Determine Which the Setting of Edge EZ Tuner for a 2001 Dodge Ram

There should be a 3 position toggle switch somewhere in the cab of your truck to change the power settings on the Edge EZ tuner, #EP30204. The toggle switch will have a little tab at one one side, see picture I have included. The position closest to…

view full answer...
What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...
Should I Get Loadlifter 5000 Or 7500 For Towing A 15K Fifth Wheel

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...
How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...
Replacement Switch and Cable Recommendation for Edge EZ Programmer #EP30204

The replacement cable and switch for the Edge EZ part #EP30204 that you referenced is the part #EPHESW3-2.

view full answer...
Can I Use Hubs with 3500-lb Capacity on Axle with 1750-lb Capacity If The Bearings Match Up?

First things first; you can determine the specs on your current axle by checking for a sticker or plate attached to the axle itself (you'll usually find it close to the center of the axle). But with that being said, in the event that you…

view full answer...
Replacement Hub for Older Dexter 8-245

The part number 8-245 is an obsolete part number but I was able to find some info on it. It was basically a 3,500 lb hub and drum that fit a 84 spindle. Because of that we have a solution that will fit. The part #AKHD-545-35-K is a 3,500 lb hub/drum…

view full answer...
Bearing Kit Recommendation for Dexter 8-248 Hub

The hub you have like part #84545BX uses the bearing kit part #BK2-100 for replacement bearings/seal/races. I attached a review video for this bearing kit for you to check out as well.

view full answer...
Lug Nut Torque Chart for Trailer Wheels

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...