Correct Bearing Kit for a 2001 Karavan Single Axle Jetski Trailer
Updated 08/12/2025 | Published 08/08/2025
Question:
I have a 2001 Karavan single Jetski trailer that I need bearings for. Are the inter and outer bearings two different sizes. Got some from Autozone and they are both same size and inner one won’t slip on larger area on axle. Do you sell the correct kits for my trailer?
asked by: Harry M
Expert Reply:
Hey Harry, thanks for reaching out!
Since you have 2 different sized bearings, you likely have a 3,500 lbs axle on your Karavan trailer so you'll need the Bearing Kit # BK2-100. This uses L44649 and L68149 bearings so all you have to do is check your older bearings for part numbers (see attached) to see if these match or not.
If you can't find the part numbers, just measure the spindle where the bearings ride with a digital caliper and we can make sure you get the right kit!
Unfortunately I don't have the bearing specs for all Karavan trailers, otherwise I'd be able to just confirm the parts you need right away.
Do these bearing numbers check out for your trailer?
(click to enlarge)
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: trailer hubs and drums
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: Loadstar ST175/80D13 Bias Trailer Tire - Load Range B
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: fender hardware
- Search Results: trailer fenders
- Q&A: Replacement Hub for a Karavan Single Jet Ski Trailer w/ a 5 on 4 1/2 Lug Pattern and 13" Wheels
- Q&A: Should Trailer Tire Rated for 90 PSI be Ran Always at 90 PSI
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Video: Measuring To Choose The Right Trailer Axle
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Search Results: trailer jack
- Article: Trailer Lighting Requirements
- Shop: Brake Controller
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
on Trailer Bearings Races Seals Caps
