Replacement Hub for a Karavan Single Jet Ski Trailer w/ a 5 on 4 1/2 Lug Pattern and 13" Wheels
Updated 08/25/2025 | Published 04/21/2025 >
Products Featured in This Question
Question:
Need help picking a hub assembly. One of the seals broke and the inside of the wheel is covered in grease. Its for a 2018 Karavan 2 place jet ski trailer. bolt pattern is 5 by 4 1/2 and it has 13 inch wheels. Thank you
asked by: Paul P
Expert Reply:
Hey Paul thanks for the information but there is no database that shows me part numbers for your 2018 Karavan 2 place jet ski trailer. To determine the correct replacement idler hubs you will need to determine the bearing combination your spindle uses.
The easiest way to do this is by removing one of your current hubs and looking for the bearing numbers stamped in the face of both the inner and outer bearings as shown in the included picture of the item # L44649 bearing.
If your bearings are worn to the point that you cannot read the bearing numbers you will need to use a digital caliper like item # PTW80157 to precisely measure your spindles in the locations shown in the included diagram.
If you could get this information for me and leave it in the comment box below, I'll be happy to find you the correct replacement hub.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Review of Lippert Trailer Bearings Races Seals Caps - Dust Cap and Rubber Plug - LC25ZP
- Search Results: trailer ramp springs
- Search Results: quick release
- Search Results: sj100
- Search Results: trailer bearings races seals caps
- Search Results: 1/2 lug nut
- Search Results: bearing l68149 trailer bearings races seals caps
- Search Results: dust caps
- Q&A: Troubleshooting a 4-Way Connector on a 2025 Grand Highlander Changing Sides on the Turn Signals
- Shop: Lippert Super Lube Dust Cap and Rubber Plug - 2.45" Diameter - Qty 2
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring - 160-lb Capacity
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Shop: Timken 473336 Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles
- Shop: Performance Tool Wheel Stud Installer Set for Auto and Truck - 2 Piece
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Q&A: Correct Bearing Kit for a 2001 Karavan Single Axle Jetski Trailer
- Shop: Windshield Wiper Blades
- Shop: Trailer Hitch
- Video: Feature Review Dexter DX7.5 Drop-N-Go Brake Actuator
- Video: Feature Breakdown: Dexter DX7.5 Drop-N-Go Brake Actuator
- Video: Detailed Breakdown of the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Video: Checking Out the Counteract Stud Cleaning Brush Head for 1/2" Studs
- Q&A: Does the Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Have a Manual Lockout
- Q&A: How Much Grease is Needed in an EZ Lube Axle
- Video: Installing the Timken Bearing Kit on a 2020 Taxa Mantis Travel Trailer
- Video: Timken Bearing Kit Step-By-Step Replacement - Utility Trailer
- Q&A: Best Type of Staples to Use for Attaching Boat Trailer Bunk Board Carpet CE11372
- Q&A: Availability of 7-1/2-inch-long V-Shaped Replacement Keel Roller for Boat Trailer
- Q&A: Replacement Hub for 1989 Ranger Trailer




Paul P.
4/24/2025
Thank you for getting back. The hub itself says KNOTT 17A01 6B7456 H. The outer bearing is a L44649. The inner seal says TRP 201702 GS-1719DL. The inner bearing is covered by the seal so let me know if I need to tear it apart to see the inner bearing part#. The inner bearing is bigger than the outer.