Is There Trailer Bearing Kit With Bearings L44649 & L68149
Updated 02/03/2026 | Published 07/26/2024
Question:
Im wanting to change out bearings, races and seals in my dump trailer. I contacted mfg of trailer and was informed outer bearing is L44649 and inner bearing is L68149. Was hoping to find a kit with all that is needed but so far all I've found are kits with two of same bearings. Do I just need to buy all parts a la carte? thanks. Jayme
asked by: Jayme R
Expert Reply:
Hi Jayme,
Thanks for that info and there is a bearing kit with the L44649 and L68149 bearings you need; the correct kit is the following:
- Hub Bearing Kit # BK2-100
This comes with both of those bearings as well as their accompanying races, the correct grease seal, along with a cotter pin and washer.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: grease cap
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Video: Trailer Idler Hub Assembly for 3,500-lb Axles Review
- Shop: Grease Cap, 1.988" OD Drive In - Qty 2
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Search Results: hub cap
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub, Bearings, and Grease Seal for 3,500 lb Dexter Axle
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Q&A: Difference Between 171255UC and TB Grease Seal
- Q&A: What Causes Grease Leaking Out of Bearing Buddy Bearing Protectors
- Q&A: How to Determine Which Trailer Roof Vent Cover will Fit a Trailer
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: All About the Grease Seal
- Search Results: trailer breakaway kit
- Video: Comprehensive Review: Hopkins Engager Push-To-Test Trailer Breakaway Kit w/ Built-In Charger
- Video: What to Know About the Hopkins Engager Push-To-Test Trailer Breakaway Kit w/ Built-In Charger
- Q&A: Replacement Bearing Kit for a Dexter 4,400 lbs Axle
- Q&A: Replacement Disc Brake Trailer Hub With Rotor And Bearing Kit To Replace TRE 46245
- Search Results: manual tongue jack
- Video: Remove and Reinstall a Trailer Hub Review
- Search Results: l68149
- Search Results: l44649 kit
- Search Results: l44649
Jerred H.
2/3/2026
Hey Jayme, how did things go with the BK2-100 bearing kit for your dump trailer? Did it have everything you needed to swap out the bearings, races, and seals? Your update could make it easier for the next person doing the same job.