Looking For Heavy-Duty Trailer Hitch For 2004 Ford F-350

Question

Question:

F350 weights over 12000 lbs. I need a hitch for towing. Most hitches are 9000 and under. Will these hitches work

asked by: Jeff M

0

Expert Reply:

Hello Jeff, thanks for reaching out. It sounds like you are looking for a rear trailer hitch receiver for your 2004 Ford F-350. If so, we do have options that are rated for up to 20,000 lbs. Take a look at the following:

- Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" # C15810

This is rated for 20,000 lbs towing or 2,700 lbs of tongue weight. Just keep in mind if your spare tire is larger than 20" it will no longer be able to be stored in the original location.

I have linked a video that shows an example of installation.

What will you be using the hitch for?

expert reply by: Jesse M

0

C15810 Example
(click to enlarge)

Jeff M.

8/11/2025

No I am looking for one for the front. I will be towing the 2004 f350 dually. And using winch on the front

Jesse M.

8/11/2025

@JeffM Ok so we do have front hitches for your truck like the Curt # 31114. This has a 5,000 lb towing rating. The 9,000 lb line pull rating would only be for recovery/winches. You would not want to use the front hitch to tow the vehicle. If your intention is to tow your F350 behind another vehicle, you would need to install a base plate like part # BX2163 which is designed and intended for flat towing. Then you would need to use the Blue Ox Trion Tow Bar # BX7520P which is 20K rated.

Answer 1

Hey Scott! Yes, there is an option that will work with your 20" spare. The Draw-Tite Trailer Hitch Receiver #DT45508 does not have the same spare tire size restriction as the Curt. This is also a Class V hitch with a 2-1/2" receiver and a…

view full answer...

Answer 2

The width of your frame indicates that your 2012 Ford F-450 is most likely a cab and chassis model which has the frame width a few inches than a standard truck bed. But if you can measure the distance between the mounting holes on the frame of your…

view full answer...

Answer 3

Hey Jerod, The Curt #C15810 is going to be a great fit for your 2001 Ford F-350. The only issue that comes up with the spare not being able to store under the vehicle is if it is larger than 20". Anything larger cannot be stored, but for your…

view full answer...

Answer 4

I reached out to my contact at Curt and was able to get a dimension sheet for the Curt Trailer Hitch Receiver - Class V #C15810 referenced in your question. I have attached an image of it for your review. This trailer hitch is designed to fit select…

view full answer...

Answer 5

Hey Robert, welcome back! I've got options to update your front and rear sway bars but which one you need for the front is going to depend on whether or not your 2001 Ford F-350 dually is 4WD or 2WD. I have listed the options below: Front End…

view full answer...

Answer 6

I have another option for you, but there is not a no drill mounting bracket that has a longer clamp than the #C57202 you purchased. Instead I recommend the Curt Easy Mount Bracket #C58003 which will mount to the receiver tube of the Curt Trailer…

view full answer...

Answer 7

Suspension enhancement systems, like the Super Springs #SSA28, can be used with weight distribution systems. However, Super Springs may not have much of an effect because a weight distribution system is going to be more effective at reducing sag and…

view full answer...

Answer 8

Yes, the Curt Trailer Hitch Receiver part #C15810 which is a fit for your 2008 Ford F-350 will allow you to tow your 2000 Holiday Rambler Aluma Lite 30SKS without the use of a weight distribution system assuming the figures you provided on the…

view full answer...

Looking For Heavy-Duty Trailer Hitch For 2004 Ford F-350

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching