Looking For Replacement Puck System Legs For Reese 20K 5th Wheel Hitch

Question

Question:

I have a reese pro20k 5th wheel hitch. Do they make replacement puck system legs for it

asked by: Ernest

0

Expert Reply:

Hello Ernest, thanks for reaching out. We do carry some replacement puck system legs for the Reese 5th wheel hitches. For example, the Replacement Legs for Reese M5 5th Wheel Trailer Hitch # RP30889. These will fit the Reese M5 5th wheel hitches RP30890 and RP30895 and they will work with the Chevy/GMC puck system.

If you can tell me the model number of your Reese hitch, I am happy to look into it and see if we have the legs you need.

This would be going in a 2025 Chevy 3500, correct?

expert reply by: Jesse M

0

RP30889
(click to enlarge)

Jesse M.

9/2/2025

Hey Ernest, did you find the right replacement puck system legs for your Reese hitch? I'm asking because knowing your outcome could really help others in a similar situation.

Answer 1

Hey Michael, The Ford OEM hitch is the Reese M5 and you would just need to swap out the legs for part #RP86FR as long as you're getting a GM truck with OEM puck system from 2020 or newer. You would not have to replace the center section of the…

view full answer...

Answer 2

We do have 5th wheel hitches that are compatible with the puck system on your 2019 GMC Sierra 3500 Denali so to get your Reese M5 20K #RP30921, which is designed for Ford puck systems, compatible with your GMC puck system you'll have to swap out…

view full answer...

Answer 3

The Reese Elite and Reese M5 5th Wheel Hitches are completely different and the Replacement Legs item #RP86FR would not fit on the Elite series. The Replacement Legs for Reese M5 5th Wheel Trailer Hitch item #RP86FR have a center to center spacing of…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Looking For Replacement Puck System Legs For Reese 20K 5th Wheel Hitch

Products Featured in This Question

Continue Researching