Replacement Hand Crank for a Thule Crown Awning

Question

Question:

Hi, I need a replacement motorized awning crank for the Thule Crown awning. Can you please send me a link for me to purchase. I know its not the TH86VK Thank you!

asked by: Scott K

0

Expert Reply:

Hey Scott. There's two replacement hand cranks for the Thule Crown awning. The first and most common one is the Replacement Hand Crank for Thule HIdeAway Awnings item # TH86VK. The second is PN 1500603195, which we do not carry and I can not find online in this country.

How do you know the item # TH86VK does not work with your Thule Crown awning?

expert reply by: Jerred H

0

Thule Crown Awning
(click to enlarge)

Jerred H.

8/15/2025

Hey Scott, did you find out why the TH86VK crank doesn't work with your Thule Crown awning? I'm curious because it might help others with a similar issue.

Answer 1

Hey Scott, congrats on your new camper. I checked with Thule and Lippert who sells the Crown 5200 manual awning. The Replacement Hand Crank for Thule Hideaway Awnings item #TH86VK is the same part number 1500602210 that shows up in their manuals.…

view full answer...

Answer 2

The 91602 gas regulator you're trying to find was discontinued which is why you're having issues finding it. Since this is the case you'll actually need to replace your entire water heater unit as there aren't any replacement gas…

view full answer...

Answer 3

Hi Mark; we don't have a bearing kit since that bearing combination is obsolete but I can give you the replacement parts individually. You will need the #LM67048, #L68149, and then for the grease seal #RG06-050.

view full answer...

Answer 4

Since you measured the drums and found they are 10 inch that is your best indication what you need as replacement assemblies. For that the best solution is the self adjusting assemblies part #AKEBRK-35-SA which will fit and work great. The numbers…

view full answer...

Answer 5

Hi Karen, What are the dimensions of the space available for the fridge? If it's pretty tight the only open we currently have would be the the same fridge #324-000119 (23-1/2"W x 25-3/4"D x 59-3/4"T), but if you have a bit more…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Replacement Hand Crank for a Thule Crown Awning

Product Page this Question was Asked From

Continue Researching