Will Yakima OverHaul HD Fit 2025 Ram 1500 With RealTruck Undercover Tonneau Cover

Question

Question:

Hello, I have a 2025 Ram 1500 with a Real Truck undercover tri-fold tonneau cover installed. Is this ladder rack compatible with this tonneau cover?

asked by: Mike R

0

RealTruck Undercover
(click to enlarge)

Expert Reply:

Hey Mike! Since that RealTruck Undercover tonneau cover mounts inside the bed rails we're off to a good start. However, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters # Y01151-5855 (68" bars) and # Y01151-5955 (78" bars) do require rails with T-slots to be able to mount the ladder rack. If you add the TS Rails # TH75FR (5-1/2' bed) or # TH65FR (6-1/2' bed) it will allow you to install the ladder rack on your truck.

What do you plan on using the rack for?

expert reply by: Robin H

0

Yakima OverHaul HD
(click to enlarge)

Mike R.

7/17/2025

Hi Robin, thanks for the info. I plan to carry two 11' kayaks. I have Malone mega wings which I'm hoping will work with the ladder rack as well.

Robin H.

7/17/2025

@MikeR happy to help! The Malone MegaWing # MPG207 fits crossbars up to 3-1/2" wide x 1-1/2" tall. The Yakima crossbars are 3" wide x 1-1/2" tall meaning the two are compatible so you're all set.

Mike R.

8/21/2025

@RobinH I ordered the TS rails and unfortunately because of my existing cover I cannot install the rails as there is a lip that needs to go into the bed of the truck. Is there an alternative rail system that would allow me to leave my cover in place or am I out of luck?

Mike R.

8/21/2025

@RobinH nevermind, I see that I need to take my bed cover rails off first and install this on top of it. I think I am good for now.

Answer 1

Hi Rich! The Malone TradeSport/OverPass Bundle - Truck Rack with Cantilever Extension #MAL73HR will indeed fit a late model Ford F150! We actually have a video of this rack on a 2025 F150. It is pretty universal and fits most full-size and mid-size…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 6

Hello Joe, Thanks for writing in! Based on the measurements you provided, the Gen-Y Glyder Shock Absorbing Ball Mount #325-GH-12001 is not the right fit for your setup. Since your Tundra's receiver measures 18 inches from the ground and your TAB…

view full answer...

Answer 7

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Answer 8

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 9

Hey Eric, the K-Source Tow Mirrors part #KS48NQ that you referenced will fit your 2025 Toyota Tundra Platinum as long as it doesn't have extendable or telescoping mirrors. What are you towing?

view full answer...

Answer 10

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 11

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 12

It sure is Doug and congrats on your new truck! The TruXedo Pro X15 Soft Tonneau Cover item #TX33TV has been confirmed to fit your new 2026 Ford Maverick. The TS Rails item #TH25FR are going to fit alongside the rails of the Pro X15 item #TX33TV on…

view full answer...

Will Yakima OverHaul HD Fit 2025 Ram 1500 With RealTruck Undercover Tonneau Cover

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching