Mounting Hardware to Use with CE Smith Fender # CE19502

Question

Question:

What mounting screws do you recommend for a CE Smith CE19502 plastic fender?

asked by: Tim L

0

Expert Reply:

Hey Tim, does your trailer already have brackets for a fender and you are looking for just the bolts for the part # CE19502 or are you looking for a complete hardware solution like with the bracket kit part # PF1135-BKT-2?

expert reply by: Jameson C

0

Jameson C.

8/7/2025

Hey Tim, did you find the right mounting screws or hardware solution for your fender? If you're still looking for a solution, I'm happy to help!

Answer 1

The 35 Ft 4-Way Trailer Wiring Harness #A35W42B you were looking at is what I recommend. This will give you plenty of extra wire to run to your side marker lights. I always like to have extra just in case since running out of wire in the middle of a…

view full answer...

Answer 2

Since your rescue boat trailer is 188 inches (15 feet 8-inches) tongue to tail and 89-1/2 inches (7-1/2 feet) width I recommend the following: I recommend Optronics right side LED trailer light #STL26RB and left side LED trailer light #STL27RB. They…

view full answer...

Answer 3

Hello Deibran, thanks for reaching out. We do offer a bracket that can be used with the Fulton Single Axle Trailer Fenders #F008595-2. Take a look at the following: - Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender…

view full answer...

Answer 4

In order to splice into the wire and add yellow side marker lights like the #MCL13A2B I recommend using the Self-Stripping Connector with Waterproof Sealant #SWC501746-1. This is designed to make a quick connection without cutting or stripping, and…

view full answer...

Answer 5

Hello Peter, thanks for reaching out. We do carry brackets that can be used with the Fulton Single Axle Trailer Fender #F008595. There are no brackets made specifically for this fender since there are so many different trailers and mounting styles.…

view full answer...

Answer 6

If your existing lights have mounting holes that are 2 inches apart from the center of the holes, then the Optronics LED Side Marker #MCL13A2B would work just fine as a replacement.

view full answer...

Answer 7

We have an option that is very close to a perfect replacement for your fender. It's the CE Smith Single Axle Trailer Fender w/ Top and Side Steps, part #CE19503. This measures 40-1/8" Long x 10" wide x 10-1/4" tall, making it only…

view full answer...

Answer 8

In regards to the CE Smith Single Axle Trailer Fender part #CE19503, this fender is designed to be used with 13" diameter wheels. The manufacturer does not provide specific measurements of the opening inside but rather the size of wheel that the…

view full answer...

Answer 9

Hey Ryan. The CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Gray Plastic item #CE19502 does not come with mounting hardware and what size you need is going to depend on how you're installing them. If you're using the CE Smith…

view full answer...

Answer 10

Yes you need to use brackets like part #CE26065PGA or #CE26061G to install the Fulton Single Axle Trailer Fender with Top Step #F008542. Basically you just secure one side of the bracket to your trailer and then the other side of the bracket to the…

view full answer...

Answer 11

We do have a selection of fenders for 13" wheels that you can use to replace your current fenders. Among our linked selection we have different constructions like aluminum, plastic, and steel. These fenders can mount via brackets or welding…

view full answer...

Answer 12

The closest option we have available to the specs you mentioned is the CE Smith Single Axle Trailer Fender #CE19502. This round fender has an overall length of 37-3/8 inches, a width of 8-7/8 inches, a height inside the wheel well of 7-1/4 inches,…

view full answer...

Mounting Hardware to Use with CE Smith Fender # CE19502

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching