Recommended Metal Weld on Fender for a 12" Wheel
Updated 09/02/2025 | Published 06/29/2025
Products Featured in This Question
Question:
i need to replace my axle/ spindle. my bearing size is L44649. in and out its is 5x4 1/2 i assume spindle replacement will be p.n tru44fr i need 1. 2 spindles 2. axle tube or what size to get from the metal shopthis is on a jet ski trailer so its narrow. also want to make this one wider. its now a kayak trailer 3. perches for the tube 4. u bolts. 1 3/4inch wide springs going to make it sprung under 5. metal weld on fenders. I run 145r12 tires. tire o.d. is 21 6. axle bearing seals appreciate the help
asked by: Rich G
(click to enlarge)
Expert Reply:
Thanks for the picture Rich. The BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter item # TRU44FR is exactly what you need if your hubs have item # L44649 inner and outer bearings. For a grease seal you'll want item # 34823.
We don't sell axle tubes so you'd need to go through whoever is welding on your spindles to sort out what you need. We do sell entire axles with idler hubs that have a 5 x 4-1/2 lug pattern like the item # e82GR item # CES84XR or item # CE33201GA-HUB. How wide are you wanting your axle to be? We've got quite a few options and this is a way less expensive route than having an axle built.
I don't know what size u-bolts or axle perches to recommend to you without knowing the diameter or shape of your axle.
I recommend the CE Smith Single Axle Trailer Fender item # CE17720. This weld on fender works with 12" wheels and tires measuring up to 22-1/2". It is 7" wide, and 8-1/4" tall.
(click to enlarge)
Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- Without Flange
- L44649
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Search Results: trailer leaf springs
- Video: Install: etrailer Trailer Hitch Receiver on a 2018 Subaru Outback Wagon
- Shop: Brake Controller
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Q&A: Bolt Size Recommended For Channel Style Tongue Trailer Coupler Installation
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Review of EZ Loader Trailer Suspension Parts - Hangers - CES54BR
- Search Results: curt 56040
- Search Results: etbc7 wiring kit
- Search Results: brake controller
- Search Results: 4 flat to 7 blade custom fit vehicle wiring
- Search Results: custom fit vehicle wiring
- Search Results: tow hitch
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: EZ Loader Equalizer Shackle Hanger - Tandem Axle - Galvanized - Bolt-On - 3" Frame - Qty 1
- Shop: Zinc Shackle Bolt for Double-Eye Springs - 3" Long
- Shop: Dexter Shackle Bolt for Double Eye Springs - 9/16" Diameter - 2-7/8" Long - Qty 1
- Shop: Redarc Tow-Pro Elite Brake Controller - Dash Knob - Off-Road Mode - Up to 3 Axles - Proportional
- Shop: Curt Universal Installation Kit for Trailer Brake Controller - 7-Way RV - 10 Gauge
- Video: The Low-Down on the Dexter Shackle Bolt for Double Eye Springs
- Q&A: Could CE Smith Trailer Axle Have New Holes Drilled at 40 inches Apart
- Video: Review of CE Smith Trailer Axles - Trailer Axle Beam with Studded Hubs - CES84XR
- Q&A: Is It Required The Spring Seat Be Welded to Trailer Axle
- Q&A: Can Axle Spring Seats Be Relocated
- Q&A: Can the Spring Perches of Trailer Axles Get Moved
- Q&A: Comparing Regular, Fused, and Circuit Breaker Junction Boxes for Trailer Wiring
Jerred H.
9/2/2025
Hey Rich, did you decide on the width for your new axle, or are you considering one of the complete axles we suggested? I'm curious to know how your project is coming along, as it might help others looking to upgrade their trailers too.