Which Wire Is The Ground Wire On Optronics LED Trailer Clearance or Side Marker Light OPT53FR?

Question

Question:

ITEM OPT53FR Which is the ground wire, the white or the brown?

asked by: Gary R

0

Expert Reply:

Hey Gary, thanks for reaching out. For the Optronics LED Trailer Clearance or Side Marker Light # OPT53FR the white wire is the ground wire.

expert reply by: Jesse M

0

Optronics LED Trailer Clearance or Side Marker Light # OPT53FR
(click to enlarge)

Gary R.

6/5/2025

Thank you Jesse M.

Jesse M.

6/5/2025

@GaryR Glad to help! Come back anytime you need anything.

Answer 1

What you have is a 5-way with a double wishbone, which means it is likely a double wire for marker lights as well as a double ground. You can replace your 5-way with another wishbone-style but it does not need to be a double wishbone with 7 wires,…

view full answer...

Answer 2

The Mighty Cord 7-Way RV Style to 5-Way Flat Trailer Connector Adapter #A10-7275VP is the easiest way to connect your 5-way flat trailer to a 7-way on your tow vehicle. This adapter will not require you to splice any wires. For a more permanent…

view full answer...

Answer 3

Hello Gary, we sure do. The correct male end connector to go with the Optronics LED Trailer Clearance or Side Marker Light #OPT53FR is the following: - Single Wire Plug for Marker/Clearance and Utility Lights - 0.180 Male Bullet - 6" Red Wire…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Which Wire Is The Ground Wire On Optronics LED Trailer Clearance or Side Marker Light OPT53FR?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching