bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Clearance Lights
  4. Rectangle
  5. LED Light
  6. Red
Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Red Lens
Optronics

Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Red Lens

Part Number: OPT53FR
In Stock
$8.91
Retail:$9.68
You Save: 8%
Trailer Lights
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Two wire design. P2 rated. Great Prices for the best trailer lights from Optronics. Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Red Lens part number OPT53FR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (3101)
  • Q & A (0)
  • Videos (1)
  • Photos

Optronics Trailer Lights - OPT53FR

Highlights

  • Reliable In Any Weather: Sonically sealed waterproof housing keeps water out even when submerged.
  • Fewer Replacements Needed: LEDs last 50 times longer and draw only 0.051 amps at 12.8V.
  • Bright, Efficient Light: Three red diodes give strong visibility with low power use.
  • One Light, Two Uses: Works as a clearance or side marker light when properly mounted.
  • Tough and Durable Build: Polycarbonate lens and stainless steel base resist impact and corrosion.
  • Simple 2-Wire Setup: Includes lead and ground wires with 0.180 female barrel connectors.

Features to know about

Brighter, Longer-Lasting Lighting: 3-Diode LED Design

This rectangular LED light packs three bright diodes behind a red polycarbonate lens, giving you clear visibility without hogging power. It runs on 12V DC and only draws 0.051 amps at 12.8V, so it’s efficient and easy on your electrical system. With no filaments to break and no bulbs to replace, the LEDs last up to 50 times longer than incandescent lights. You get a dependable light that just works every time you flip the switch.

Built for the Elements: Sonically Sealed and Submersible

Water and vibration are no match for this sealed housing. The lens and body are sonically sealed into a single waterproof unit, making it fully submersible and ideal for use around water or in harsh environments. The sealed design keeps moisture out and protects the diodes and circuit board from damage, so you won’t have to worry about corrosion or short circuits down the road.

Reliable Coverage Where You Need It: P2-Rated Beam Pattern

When properly mounted, this P2-rated light throws a clean 90-degree spread—45 degrees to either side of centerline. That makes it perfect for use as a clearance or side marker light, bright enough to be seen straight on but not meant to cover both roles at once. It’s an easy way to stay visible and compliant with trailer lighting requirements while keeping wiring simple.

Easy Installation: Stud Mount with 2-Wire Connection

Mounting is straightforward with the included stud and stainless steel base. The two-wire setup uses a lead and ground wire that connect through 0.180" female barrel bullet fittings, so wiring is quick and secure. At just 2-1/8" long by 1-1/8" wide by 1-1/16" deep, the compact housing fits neatly where you need it without getting in the way or catching on anything.

Specs

Dimensions

  • Dimensions: 2-1/8" long x 1-1/8" wide x 1-1/16" deep
  • Dimensions (W x H x D): 2.125 x 1.125 x 1.063
  • Size/Shape: Rectangular

Dimensional diagram of the Optronics LED Trailer Clearance or Side Marker Light showing a rectangular red lens with labeled measurements 2-1/8 inches long, 1-1/8 inches wide, and 1-1/16 inches deep.

  • Dimensions: 2-1/8" long x 1-1/8" wide x 1-1/16" deep

Electrical

  • Voltage: 12V
  • Power draw at 12.8V: 0.051 amps
  • Amp Draw: 0.051
  • Connection: Hard wired 0.180 female barrel(s)
  • Red marker/clearance light: 2-wire, .180 female barrels

Lighting

  • Diodes: 3
  • Color: Red
  • Lens Material: Polycarbonate
  • Housing Material: Stainless Steel
  • FMVSS: P2 P3
  • Mount: Stud
  • Lumens: --

Weight and Warranty

  • Weight: 0.088 lbs.
  • Warranty: Lifetime LED Warranty

MCL95RBF Optronics LED Clearance or Side Marker Trailer Light - Submersible - 3 Diodes - Rectangle - Red Lens - P2/P3 Rated





Video of Optronics LED Trailer Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Red Lens
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Feature Review Optronics LED Trailer Clearance or Side Marker Light

Hi there, I'm Michael with etrailer.com, today we're gonna take a quick look at this Optronics submersible LED trailer clearance or side marker light. This LED trailer light is going to function as either a clearance light or a side marker light depending on how you have it mounted. It is P2 rated which means it's going to produce a 45 degree angle. So the light can be seen on either side of its center line for a total of 90 degrees but can't be seen as clearly from the side because it's not a full 180 degrees of light being there. So you will be able to either use it as a clearance light or a side marker light depending on how you have it installed. This is sonically sealed, so it's going to be waterproof.

Great application would be for your boat trailers or something that you're gonna be putting into water frequently, waterproof polycarbonate housing and lens unit is going to keep it nice and water tight so that you don't have to worry about water getting in there and causing any issues. This does have a red lens over those three light LEDs. If you're not familiar, LEDs are a really nice replacement for your traditional incandescent lights. There are a lot more efficient, so it's gonna provide brighter light with less power output. The bulbs are also a lot more durable, so you're not gonna have to replace them nearly as frequently because they don't have those brittle filaments on the inside, so they last about 50 times longer than your traditional incandescent lights.

This one actually has a lifetime warranty on those LEDs, so you can trust, it's gonna last for a nice long time for you. This does have a two wire design, so you've got your lead and your ground that you'll be able to hook up to your wiring system. This is gonna be compatible with your 12 volt DC systems, it's only gonna draw about a 0.051 amps on your 12 volt system. This does also have the stud Mount that's going to connect it to your trailer the included stud and stainless steel base. And as far as our dimensions go, we're looking at right two and one eighth of an inch long by one and one eighth of an inch wide, and if we measure right where that base is, we are gonna have right about one and one eighth of an inch deep as well.

So if you are looking for a red side marker or clearance light for your boat trailer or any of your other aquatic trailers, this is gonna be a really great option for you to provide that light for you. That's going to complete our look for today, again, I'm Michael with etrailer.com thanks for watching..

Customer Satisfaction Score:

Ratings & Reviews

4.8

3099 reviews
5 Stars
(2695)
4 Stars
(269)
3 Stars
(57)
2 Stars
(21)
1 Star
(57)
Review sort icon
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Two wire design. P2 rated.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:

Great product and delivery service



by:



by:

Product appears to be extremely well-ma de.



by:



by:

Howard profile picture

Howard

11/29/2024

great working good



by:

Leann profile picture

Leann

8/4/2025

Working perfect



by:

Horrible. I had to return as 99/100 lights have a ground without a secondary wire and they have a steel back that would rust out so quick. I sent these back to etrailer, but I still have not received a credit for them. They were sent back with everything within etrailer requirements for return. Where is my credit even after being authorized by etrailer staff? Be careful with etrailer if you need to return something. They do not quickly return your money.

Jenny N. profile picture

Jenny N.

2/20/2024

My apologies that the credit has not been applied for you. Customer Service will reach out and remedy this ASAP. As for the light we do have a similar light that does only have one wire as part # MCL95RB. It grounds through the hardware that mounts it to the trailer frame.



by:

THEY WORKED EXCELLENT ON MY JOHN DEERE TRACTOR. NICE & BRIGHT. WILL BUY AGAIN.THANK YOU !



by:

High quality light which shines much brighter than the original .



by:

Great price easy ordering shipping was quick video on installing exceptional



by:

Good quality, only thing is connectors are very short and makes install difficult depending on condition. May not affect all installs but keep that in mind.



by:

Quick shipping and great selection.

Brian profile picture

Brian

8/9/2023

Still working well.



by:

Just what I was looking for!

Lagatorpatrol profile picture

Lagatorpatrol

6/7/2025

Awesome Works flawlessly



by:

While just recently installed, Webstar has a good reputation for trailer lights. The price point was favorable to replace both running lights on the trailer



by:

Is exactly what I needed. Quality.


25
25

See what our Experts say about this Optronics Trailer Lights

Do you have a question about this Trailer Light?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Michael B
Installed by:
Michael B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.