Availability of Individual SnapPad 10 inch Octagon

Question

Question:

Is the sn76fr Jackpad available singly. Not a set of 4

asked by: Henry

0

Expert Reply:

Hey Henry, yes we do have the Snappads of the part # SN76FR that you referenced individually with the part # SP84FR. Did you lose one by chance?

expert reply by: Jameson C

0

Jameson C.

9/12/2025

Hey Henry, did the replacement SnapPad work out for your jack system? I'm asking because knowing your experience can help others in a similar situation.

Answer 1

I would love to tell you exactly what you need but unfortunately that is not possible. The reason for this is that not all 2022 Jayco Precept 31UL's come with the same leveling system from the factory. If you call and ask Snap Pad, they'll…

view full answer...

Answer 2

Since you have 10 inch octagon feet on your jacks the correct SnapPads is the part #SN76FR. I can't verify the fit of anything off Amazon.

view full answer...

Answer 3

I recommend the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet, #SN76FR a qty of 4.

view full answer...

Answer 4

For 10" octagon shaped jack feet you would need the SnapPad EQ Octagon Jack Pads #SN76FR that you were already looking at, but before purchasing you'll need to measure just how tall the edges stick up from the ground since your jack feet…

view full answer...

Answer 5

They definitely will Paul and congrats on the new RV. The SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet item #SN76FR are designed specifically for your 10" octagon shaped feet. Got any fun trips…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Availability of Individual SnapPad 10 inch Octagon

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching