Which SnapPads Fit 10 inch Octagon Shaped Feet

Question

Question:

Hello, I have recently installed a Bigfoot 10inch octagon leveler set. I want to confirm that the SN76FR is the right set for the Bihfoot jack system. Ive have also researched Snap Pad BF10 on Amazon. Are these the same size? Thanks in advance,

asked by: Dan O

0

Expert Reply:

Since you have 10 inch octagon feet on your jacks the correct SnapPads is the part # SN76FR. I can't verify the fit of anything off Amazon.

expert reply by: Jameson C

0

Answer 1

They definitely will Paul and congrats on the new RV. The SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet item #SN76FR are designed specifically for your 10" octagon shaped feet. Got any fun trips…

view full answer...

Answer 2

The information I can find shows that the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet #SN76FR are the correct pads for your 2017 Jayco Seneca Super C Motorhome. I do recommend verifying that you do have the…

view full answer...

Answer 3

Hey David, we don't have any Hexagon shaped SnapPads, did you by chance mean Octagon? If that's what you meant, then the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet #SN76FR will work, but we…

view full answer...

Answer 4

I recommend the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet, #SN76FR a qty of 4.

view full answer...

Answer 5

While we do not have something like that, we do still have something you may be interested in. Instead, we have the SnapPad Grand Jack Pads for Equalizer Leveling Sytems w/ 10" Octagon and 12" Round Feet #SP84FR74. These pads will add extra…

view full answer...

Answer 6

For 10" octagon shaped jack feet you would need the SnapPad EQ Octagon Jack Pads #SN76FR that you were already looking at, but before purchasing you'll need to measure just how tall the edges stick up from the ground since your jack feet…

view full answer...

Answer 7

The Tekonsha Prodigy P3 Trailer Brake Controller part #90195 will draw 1 amp of current per volt sent to the trailer brakes on a tandem axle trailer and 1/2 amp of current per volt sent to the trailer brakes on a single axle trailer. Therefore, the…

view full answer...

Answer 8

Hey Henry, yes we do have the Snappads of the part #SN76FR that you referenced individually with the part #SP84FR. Did you lose one by chance?

view full answer...

Answer 9

Yes, the SnapPad EQ, #SN76FR will fit 10" octagon or concave round jack feet.

view full answer...

Answer 10

If you have 10" octagonal or concave round jack feet on your Baystar, then the SnapPad EQ Octagon Jack Pads for Equalizer Leveling System w 10" Octagon Jack Feet #SN76FR will work great. If not, you're going to have to measure your jack…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Which SnapPads Fit 10 inch Octagon Shaped Feet

Product Page this Question was Asked From

Continue Researching