Parts Needed to Install Brake Controller and 7-Way in 2000 Ford F-150 with 4-Way

Question

Question:

Hello, i have a 2000 f150 with the flat four wiring I would like to upgrade it for trailer brake brakes. What would be kit for that?

asked by: Matthew G

0

Expert Reply:

Hey Matthew, to install a brake controller and 7-way in your 2000 Ford F-150 so that you can control the brakes of your trailer what you'd need is a brake controller like the Brake EVN part # TK83BR which comes with the correct install harness and then the 7-way kit custom fit for your truck with the part # 118242 and you'd be set. What are you towing?

expert reply by: Jameson C

0

Jameson C.

9/12/2025

Hey Matthew, did you have a chance to install the brake controller and 7-way kit on your F-150? I'd love to know how it worked out for towing your trailer.

Answer 1

Hey Jessica, we do have a 7-way and 4-way combo that is a confirmed fit for your 2001 Ford F-150 with the part #30955. This plugs into the round 7-way connector you have now and gives you both styles of connectors. I have a version of this on my…

view full answer...

Answer 2

To install the Tekonsha Prodigy P3 #90195 you were looking at in your 2006 Ford F-450 Cab and Chassis you will need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3065-P which will plug into the factory trailer brake controller…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Parts Needed to Install Brake Controller and 7-Way in 2000 Ford F-150 with 4-Way

Continue Researching