Hub/Drum and Brake Assemblies that Fit Trailer Spindle Dimensions of 1.06 and 1.36 inch
Updated 05/13/2025 | Published 05/03/2025
Products Featured in This Question
Question:
Im swapping axles on a Scamp 13 camper trailer with 7 electric brakes and 5x4.5 bolt pattern. 2,000 lb axle weight rating applies to both axles. The spindles on the axle Im swapping out measure a constant 1.06 in diameter from inside to outside. The spindles on the axle Im swapping in measure 1.06 in diameter on the outside, but 1.36 on the inside. I may be off by a thousandth or two either way. Does eTrailer have a hub and drum assembly that fits the new 7 electric brakes I bought from etrailer and the spindles Im swapping in? Would more detail from me help? Thanks
asked by: Vince E
Expert Reply:
Hey Vince, thanks for all of the info on your spindle. Based on that what you have it is actually a spindle for a 3,500 lb axle so you'd need a larger hub and drum like the part # 84546UC3-EZ which is a 10 inch diameter hub/drum. Then for brake assemblies you'd need the part # AKEBRK-35 for a set of left and right assemblies.
Sometimes for off road axle setups they will actually uprate the spindle that is used to give it a little more strength. But to translate what your spindle dimensions are the 1.06 inch diameter is for the outer bearing and the 1.36 is where the inner bearing will ride. Does your axle have a capacity listed on a sticker on it?
Product Page this Question was Asked From
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: trailer brake controller
- Search Results: trailer breakaway kit
- Search Results: trailer breakaway
- Search Results: emergency brake cable
- Search Results: hopkins trailer breakaway kit
- Shop: Brake Controller
- Search Results: 10" electric brakes
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - Up to 2 Axles - Proportional
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Video: Feature Breakdown: Fastway Zip Trailer Breakaway Switch with Coiled Cable
- Q&A: Guide for Adding Brakes to Trailer and Brake Controller for 2000 Chevy Silverado
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Video: All You Need to Know About the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Video: Let’s Check Out the Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles
- Search Results: trailer spindles
- Video: Trailer Wiring 7-Way Upgrade Kit Feature Review
- Video: Detailed Breakdown of the Trailer Wiring 7-Way Upgrade Kit
- Article: Trailer Wiring Diagrams
- Video: Remove and Reinstall a Trailer Hub Review
- Q&A: What Wiring Diagram do You Have for the Hopkins 7-Way # HM40975 on My Ford F-350?
- Q&A: Do I Need To Ground the Trailer Junction Box If Running a Ground Wire For Each Light To This
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Parts Needed to Add Brakes to a 3.5K Single Axle Trailer
on Trailer Hubs and Drums
Vince E.
5/13/2025
Thanks for sharing your expertise. Now, I can finish the project. Gracias, Vince