Can 7-Pole and 4-Pole Trailer Connector 12V Wire Be Swapped With 10 Gauge
Updated 05/04/2025 | Published 05/01/2025
Question:
How hard would it be to swap the Battery cable for a 10-gauge wire? I am installing this with a 30 amp breaker connected to my battery and Id like to use the right sized cable for that breaker.
asked by: Josh
Expert Reply:
Hi Josh! If you want to use the 7-Pole and 4-Pole Trailer Connector # HM40975-11998 you're going to have to stick with 12 gauge and use a 20 amp breaker. The wiring and connector on the US car connector are completely sealed so you won't be able to swap it without breaking it. If you want to use this connector style that is your only option unless you can find a US car connector that accepts 10 gauge wire and you can wire yourself. Then you can plug it into the # HM40975.
(click to enlarge)
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Search Results: tekonsha prodigy
- Search Results: 15 amp breaker
- Q&A: Should Fuse or Circuit Breaker Be Used When Installing Trailer Brake Controller
- Q&A: Does a Fuse Need to be Installed on the Power Wire When Installing the Tekonsha Voyager # 39510
- Q&A: Troubleshooting Blown Fuse for T-One Trailer Wiring on a 2021 Jeep Wrangler
- Q&A: Can Fuses Be Used In Place of Circuit Breakers When Installing 4 to 7-Way Adapters
- Q&A: Where Does Blue Wire Go on 4 to 7-Way Adapter With Curt Echo Wireless Trailer Brake Controller
- Q&A: How To Convert 4-Way on Toyota Rav4 into 7-Way for Trailer without Brakes
- Q&A: Choosing Between Tekonsha or Curt Powered Taillight Converter/Wiring Harness for 2020 Honda Odyssey
- Shop: 30 amp. In-Line Circuit Breaker - Perpendicular Mount Bracket
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Search Results: 40985