How To Convert 4-Way on Toyota Rav4 into 7-Way for Trailer without Brakes
Updated 04/03/2023 | Published 04/01/2023
Question:
My car, RAV4, has a 4-way flat but my tear trailer has a 7 pin round. No trailer brakes. Do you have a 4-way to 7-way adapter? Thanks!
asked by: Joe O
Expert Reply:
Yes, in order to convert the 4-way trailer wiring harness on your Toyota Rav4 into a 7-way trailer wiring harness you just need a simple adapter, the Curt Trailer Connector Adapter part # C57672 which features a plug-in install. The two 4-ways will plug into one another and then you'll have a few more wires to hook up. The white wire goes to ground and then the rest are optional. If the trailer does not have brakes, the blue wire can just be tapped up, the same goes for the yellow reverse and black trailer battery wires.
Product Page this Question was Asked From
Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat
- Custom Fit Vehicle Wiring
- Wiring Adapters
- Universal Fit
- 4 Flat to 4 Flat
- 4 Flat to 7 Blade
- Plug and Lead
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Shop: Portable Power Watchdog Surge Protector with Bluetooth, WiFi, and Emergency Shut Down - 30 Amp
- Search Results: 15 amp breaker
- Search Results: tekonsha prodigy
- Q&A: Where Does Blue Wire Go on 4 to 7-Way Adapter With Curt Echo Wireless Trailer Brake Controller
- Q&A: Does a Fuse Need to be Installed on the Power Wire When Installing the Tekonsha Voyager # 39510
- Q&A: Troubleshooting Blown Fuse for T-One Trailer Wiring on a 2021 Jeep Wrangler
- Q&A: Can 7-Pole and 4-Pole Trailer Connector 12V Wire Be Swapped With 10 Gauge
- Q&A: Can Fuses Be Used In Place of Circuit Breakers When Installing 4 to 7-Way Adapters
- Q&A: Should Fuse or Circuit Breaker Be Used When Installing Trailer Brake Controller
- Q&A: Choosing Between Tekonsha or Curt Powered Taillight Converter/Wiring Harness for 2020 Honda Odyssey
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Shop: 30 amp. In-Line Circuit Breaker - Perpendicular Mount Bracket
- Shop: Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat
- Search Results: 40985
- Shop: Curt Trailer Connector Adapter with Backup Alarm - 4-Way to 7-Way RV and 4-Way Flat
- Shop: Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
- Search Results: 4 to 7 pin
- Search Results: 7 pin
- Video: etrailer 5K Electric A-Frame Trailer Jack with 7-Way Comprehensive Review
- Shop: Starter Solenoid - SPST - 12 Volt - 100 Amp - Continuous Duty - Insulated - UL Listed
- Video: Checking Out the Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
- Video: Hands-On with the Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
- Video: DIY Install: Mighty Cord Trailer Connector Adapter on your 2013 Thor ACE Motorhome
- Video: In-Depth Review of the Mighty Cord Trailer Connector Adapter
- Video: How to Install: Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps on your 2017 Toyota Highlander