Will Kodiak 8k Disc Brakes for AL-KO Axle Fit etrailer Axle
Updated 10/22/2025 | Published 04/05/2025
Products Featured in This Question
Question:
HI, NEED A HUB WITH A 5/8 STUD. WILL THE 7K AXLE AND 8K BRAKE FIT TOGETHER? Trailer Axle Beam with Easy Grease Spindles - 4 - 94 Long - 7,000 lbs Part Number: e35GR Kodiak Disc Brakes - 13 Hub/Rotor - 8 on 6-1/2 - Dacromet - 8K - Oil - AL-KO/Quality Part Number: KOD32FR
asked by: Don M
Helpful Expert Reply:
Hey Don! The Kodiak # KOD32FR will not fit the etrailer # e35GR. These brakes are designed to fit a 4-bolt brake flange on 8k axles and the etrailer 7k axle has a 5-bolt brake flange. Even if they matched, these are specifically designed for the old AL-KO axles which are a little different.
For 7k disc brakes with 5/8" studs I recommend the Kodiak Disc Brakes # KOD63FR instead. Are you wanting oil bath disc brakes? These are designed for grease but can be converted to oil bath by swapping out the seal with # 9103309 if that is what you would prefer.
(click to enlarge)
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 94" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 78-1/4 Inch Spring Center
- 94 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Q&A: Disc Brake Conversion Kit for a 5th Wheel Trailer w/ 7,000 lbs Axles
- Q&A: Disc Brake Set-Up for 2018 Pratt Deck Trailer With Tandem 7,000 Pound Axles, 5/8" Studs
- Search Results: electric~hydraulic brake actuator brake actuator
- Search Results: t4844100
- Search Results: ez latch
- Search Results: disc brakes
- Video: Kodiak Hydraulic Brake Line Kit Spec Review
- Video: All About the Kodiak Disc Brakes
- Shop: DeeMaxx Alpha G1000 Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi
- Shop: Kodiak Disc Brakes - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 7,000 lbs - E-Z Lube
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K
- Search Results: 195 8 lug wheel
- Video: A Closer Look at the Hydrastar Marine Electric Over Hydraulic Actuator for Disc Brakes
- Shop: Kodiak Hydraulic Brake Line Kit - Tandem Axle - 20'
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Shop: Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Q&A: Correct Pressure for Hydrastar EOH Actuator on 2013 Big Tex Tandem Axle Trailer With Disc Brakes
- Q&A: How Much Pressure Does an Electric Over Hydraulic Trailer Brake Actuator Put Out
- Shop: Hydrastar Vented Marine Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi
- Shop: Hub-Piloted Solid Center Wheel w -0.5" Offset - 17-1/2" x 6-3/4" - 8 on 6-1/2 - Black
- Video: Review of DeeMaxx Brake Actuator - Electric-Hydraulic Brake Actuator - DE97SR
- Video: All About the Grease Seal
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: Correct Torque Rating for a Trailer Wheel Spindle Nut
- Q&A: Recommended Disc Brake Conversion Parts for a 5th Wheel Trailer w/ 8,000 lbs Axles
- Article: Titan Hydraulic Trailer Parts
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
Robin H.
10/22/2025
Hey Don, how did the Kodiak disc brakes end up working with your 7K axle setup? Your update could make it easier for others trying to match hubs and brakes with 5/8" studs.