Will Prodigy P3 Controller Work with Tekonsha Adapter for 2021 Ram 3500

Question

Question:

Is the tekonsha brake controller part number 90195 compatible with tekonsha wiring harness part number 302400? I have a 302400 harness on my 2021 ram 3500 from an existing tekonsha brake controller that was incompatible with electric over hydraulic brakes. Will the 90195 brake controller plug right on to the 302400 harness?

asked by: Matthew S

0

Expert Reply:

Hey Matthew, thanks for reaching out!

Yes, the Tekonsha Prodigy P3 # 90195 will fit perfectly with your Plug-In Wiring Adapter # 3024-P on your 2021 Ram 3500.

What are you planning on towing?

expert reply by: Jon G

0

Matthew

4/3/2025

40-ft step deck

Jon G.

4/3/2025

@Matthew Sounds good! Let me know if you end up needing anything else!

Answer 1

It sounds like you need the Hydrastar Electric Over Hydraulic Actuator Adapter Module #HBA-CAM for the OEM brake controller on your 2022 Ram 3500. This will ensure that your controller works properly with the Hydrastar Electric Over Hydraulic…

view full answer...

Answer 2

It sounds like the 7-Way connectors are not pinned out in a standard configuration. I have included a picture that shows the vehicle side functions of a 7-Way trailer connector. Use a circuit tester such as #PTW2993 to determine the functions of your…

view full answer...

Answer 3

The correct brake controller wiring harness to install the appropriate Tekonsha brake controller on your 2016 Ram 2500 is the #3024-P. Why were you interested in a different one? Keep in mind, the Ram from the 2013 model year on has a multiplex…

view full answer...

Answer 4

Hey Stacy, it's definitely possible to install an aftermarket brake controller like the Prodigy P3 part #90195 in your 2021 Ram 3500. To do this you will have to disconnect the ITBM (Integrated Trailer Brake Module). Doing so will turn on a…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will Prodigy P3 Controller Work with Tekonsha Adapter for 2021 Ram 3500

Continue Researching