Does Weight Distribution Need to Disconnect When Backing Up
Updated 10/30/2025 | Published 02/21/2025
Question:
Jameson, If I read this correctly, what you are saying is that you need to remove the whole C17062 WD Hitch if it requires making some sort of a turn when backing up? like into a drive way or campsite? You need to back straight in? or are you just talking about the anti sway friction bar that needs to be removed?
asked by: Chuck
Expert Reply:
Hey Chuck, great question but you would only need to disconnect the spring bars of the Curt WD system part # C17062 from the hangers on the trailer frame and if it's really tight the friction sway control system. With that said, like with any WD system if you are backing up mostly straight you can leave the system installed but if it's a tighter turn than what you would find yourself going forward the spring bars have to come off.
Product Page this Question was Asked From
Curt Round Bar Weight Distribution System w/ Friction Sway Control - 10K GTW, 1K TW
- Weight Distribution Hitch
- WD With Sway Control
- Round Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Requires Disconnection
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: valley weight distribution hitch
- Video: Review of Fastway Replacement Trunnion e2 Weight Distribution System - FA92-02-0844
- Q&A: Availability of Replacement 22210E Spring Bar on Reese Weight Distribution System
- Q&A: Comparing Bar Versus Chain Weight Distribution Hitches For a 3,600LB Trailer
- Q&A: What is the Difference Between Trunnion and Round Bar Weight Distribution Systems
- Video: Comprehensive Review: Reese Weight Distribution w/out Shank
- Shop: Replacement Trunnion for Fastway e2 Weight Distribution Systems - 12,000 lbs GTW
- Shop: Replacement Trunnion for Fastway e2 Weight Distribution Systems - 8,000 lbs GTW
- Shop: Curt MV Weight Distribution System - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Shop: Curt Trunnion Style Weight Distribution System with Shank - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Replacement Trunnion for Fastway e2 Weight Distribution Systems - 10,000 lbs GTW
- Video: Let’s Check Out the Blue Ox TrackPro Weight Distribution w/ Sway Control
- Video: Review of the Blue Ox TrackPro Weight Distribution w/ Sway Control
- Shop: Blue Ox TrackPro Weight Distribution w/ Sway Control - 9-Hole Shank - 13K GTW, 1.3K TW
- Shop: Curt Trunnion Style Weight Distribution System w/ Shank - 10,000 lbs GTW, 1,000 lbs TW
- Search Results: haloview
- Q&A: Can You Back Up With Sway Control Bar Removed From Curt MV Weight Distribution System?
- Search Results: voyager
- Search Results: voyager backup camera
- Video: Installing the Voyager WiSight 2.0 Wireless RV Backup Camera System on a 2018 Airstream Sport Travel
- Video: What to Know About the etrailer Reversible RV Outdoor Rug w/ Stakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: weight distribution hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
on Weight Distribution Hitch
Jameson C.
10/30/2025
Hey Chuck, how did things go when backing up with the Curt weight distribution hitch? Did removing just the spring bars make it easier to handle those tighter turns? Your update could make it easier for others working with the same setup.