bing tracking image
Q & A Icon

Parts Needed to Flat Tow 2022 Ford Edge ST  

Updated 10/30/2025 | Published 02/23/2025

Question:

I have a 2022 Ford Edge ST how hard is it to set up for flat towing ?

0

Expert Reply:

Hey Dan, so your 2022 Ford Edge ST can be flat towed and we have the parts needed to do it but like all vehicles I wouldn't say the setup is overly difficult. There's a few things that have to be installed and some like the base plate kit can take a bit of time to install. The first thing you'd need is a base plate kit like the Blue Ox part # BX2677 which is one of the easier to use options for sure.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes with safety cables. The coiled design helps keep the cables off of the ground.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

expert reply by:
0
Jameson C
Jameson C. profile picture

Jameson C.

10/30/2025

Hey Dan, how did things go getting your Ford Edge ST set up for flat towing with the Blue Ox base plate kit? Your update could make it easier for the next person working through the same setup.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>