Recommended U-Bolt Kit for Mounting 3" Diameter Axles w/ a 5,200 lbs to 7,000 lbs Capacity
Updated 10/30/2025 | Published 02/10/2025
Products Featured in This Question
Question:
I am looking for U bolts for a Dexter axle. The sticker has 2 part numbers, 358264 and 3631962. The axle is 3 in diameter. The bolt diameter is 1/2 and the length is approximately 7. I need 4 sets for 2 axles.
asked by: Ron M
Expert Reply:
Hey Ron, thanks for the information! For replacement u-bolts you'll need the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts item # APUBR-8. This will give you 4 u-bolts, plates, and bolts to get your axles mounted on your trailer.
I have linked an installation video below so you can see how to get them set up. What kind of trailer do you have?
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - Easy Grease - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacing Bent 3,500lb Axle In 2001 Nash 18FM Travel Trailer 6 Lug
- Shop: Lippert Trailer Axle Beam with Super Lube Spindles - 86" Long - 2.5K to 3.5K - Overslung
- Q&A: Do You Have a 3,500 lbs Overslung Axle w/ a 86" Hub Face and a 68-1/2" Spring Seat?
- Video: Review of Lippert Trailer Axles - Trailer Axle Beam With Super Lube Spindle - LC33PK
- Shop: Lippert Complete Bearing Kit for 3.5K Trailer Axles - L44649/L68149 Bearings, L44610/L68111 Races
- Search Results: trailer suspension parts
- Search Results: 11" equalizer
- Search Results: morryde trailer suspension parts
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacement Leaf Spring for Dexter Part Number 072-099-01
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: MORryde 10" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K
- Video: A Closer Look at the 6-Leaf Double-Eye Spring for 5,000-lb Trailer Axles
- Video: Universal Group 3-Leaf Double-Eye Spring Installation
- Search Results: trailer axles
- Video: Detailed Breakdown of the Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles
- Shop: Dexter Trailer Axle w/ Electric Brakes - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" - 3,500 lbs
- Video: Complete Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: Installing the Dexter U-Bolt Kit on a 2018 Grand Design Reflection Fifth Wheel
- Article: Trailer Wiring Diagrams
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Search Results: trailer leaf springs
on Trailer Axles
Jerred H.
10/30/2025
Hey Ron, how did the U-bolt kit work out for your Dexter axles? Did the fit and hardware line up the way you needed for both axles? Your update could make it easier for the next person with the same setup.