Troubleshooting Trailer Right Stop/Turn Signal not Functioning on a 2011 Honda Odyssey 4-Way
Updated 07/02/2024 | Published 06/08/2014 >
Question:
I have installed the hitch light wiring on my 2011 Honda odyssey. It worked fine at first . But yesterday I noticed the right break light is not functioning. I checked it with the hitch connector and that is out as well. Hoping it is a fuse. Where would I find the fuse to check if this is the problem? Thanks for your help. Regards
asked by: Chris W
Expert Reply:
The first place I would check is the rear fuse panel on your 2011 Honda Odyssey. It sounds like you blew a fuse so checking the condition of the fuses required to install the Tow Ready Wiring Harness part # 118521 is a logical solution.
You will want to check the condition of the 10 amp fuse that's in the number 8 position of the rear fuse box as well as the 7.5 amp fuses in the number 2 and 11 position.
Fast forward to the 2:00 minute mark of the video I attached to see where these fuses are located.
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: e98862
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: Setting up the etrailer Trailer Hitch Receiver on your 2012 Honda Odyssey
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Mount: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2012 Honda Odyssey
- Video: Installation Guide for the Draw-Tite Max-Frame Trailer Hitch Receiver on a 2012 Honda Odyssey
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Nylon Tube Brush - 1/2"
- Video: First Impressions of the Napier Sportz SUV Tent
- Video: Let’s Check Out the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Napier Sportz SUV Tent - 5 Person - 9' x 9' - Blue and Gray
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: 2011 Honda Odyssey Derale Dyno-Cool Tube-Fin Transmission Cooler Kit: Complete Installation
- Q&A: Trailer Stop and Turn Signals Stop Working On 2012 Honda Odyssey
- Q&A: Working Running Lights, But No Turn Signals or Brake Lights On Trailer
- Q&A: Troubleshooting Wiring on 2013 Honda Odyssey
- Q&A: Troubleshooting Curt Trailer Wiring Harness on 2012 Honda Odyssey
- Q&A: Trailer Running Lights Not Working When Connected to 2012 Honda Odyssey with Curt Wiring Harness
- Q&A: Turn Signals on Trailer Not Working When Running Lights are On
- Video: Set up: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2011 Honda Odyssey
- Shop: Transmission Cooler
- Q&A: Transmission Cooler Installation in 2012 Honda Odyssey



Tim
7/2/2024
Where is the link to the video?