Difference Between Bestop Supertop for Truck and Supertop for Truck 2

Question

Question:

What is the main difference between the Bestop Supertop for trucks vs. Supertop for trucks 2? Thank you

asked by: Ryan

0

Expert Reply:

Hey Ryan! What kind of truck to do you have? The main differences between the Supertop for Truck like # B76308 and Supertop for Truck 2 # B77301-35 are the operation and the construction. The Supertop 2 improves on the design of the original and allows for one person operation from the side of the truck. The improved construction with the heavy-duty Black Diamond fabric is what allows the Supertop 2 to carry a 5-year warranty vs. the 1-year warranty from the original.

Fitment also plays a factor since some newer trucks only have the Supertop 2 available. If you can add your year, make, model, and bed length in the comments below I would be happy to help you find the right part number.

expert reply by: Robin H

0

Sylvanna A.

7/16/2025

Hello Robin, thank you for the article. I would like to order a best top super top two for my 2019 3500 Dodge dually. Would you be able to take care of this for me? Thank you, Sylvanna

Robin H.

7/16/2025

@SylvannaA what is the bed size? It looks like we only have it for the 6-1/2' bed which is the # BE45GV. For the 8' bed the regular Supertop # B76317 is what is available.

Sylvanna A.

7/16/2025

@RobinH Hi again, it’s an 8ft bed. I’m looking for the supertop 2.

Robin H.

7/16/2025

@SylvannaA sorry if that wasn't clear, we don't have a Supertop 2 for the 8' bed and Bestop doesn't list one either. The only option is the regular Supertop.

See All (5) Replies to Sylvanna A. ∨

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 4

Frank, yes they do. What you're going to need is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers #Y06180 which will work with the BaseLine towers and comes with the clip and landing pads. If you're looking for something else, feel…

view full answer...

Answer 5

Since the coupler height on the trailer is 18 inches and the receiver height on the 2014 Toyota Sienna is 11-1/4 inches a ball mount with a 4 inch rise will not be high enough to tow the trailer level. You would need a ball mount with a 6-3/4 inch…

view full answer...

Answer 6

The Inno Velo Gripper Bike Rack for Truck Beds part #INRT202 hooks onto the lip of the bed rail so it won't work with any tonneau cover that uses rails which affix to the bed (even with cover folded/rolled up) which is most tonneau covers. That…

view full answer...

Answer 7

Bestop does offer a Collapsible bed cover for the 2005-2010 Tacoma with a 5 foot bed. The part number is B76308. The mesh kit mentioned does replace the windows and is transparent. The mesh kit is part #B76308. I will provide links to the product…

view full answer...

Answer 8

Tom, it looks like CAMP365 is near (~4.6 miles) the 55437 ZIP you gave, and should be able to get you set up. I'd still recommend using our installer locator (which I've linked to this answer) to shop around a bit and possibly find one closer…

view full answer...

Answer 9

That's a good question, and for your 2006 motorhome on a Ford F-53 chassis, the best option to start with is using the Timbrens on the rear of your motorhome: - Timbren Rear Suspension Enhancement System #TFRF53A The reason for that is a…

view full answer...

Answer 10

On a Class I or II 1-1/4 inch trailer hitch you will need to use a 1/2 inch hitch lock such as #e98879. This lock has a 2 inch span which is the usable length of the pin. I have included a link to a video review for you. For a Class III or IV 2 inch…

view full answer...

Difference Between Bestop Supertop for Truck and Supertop for Truck 2

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching