Load Rating Per BullRing Truck Bed Side Wall Anchor

Question

Question:

What is the load rating per individual BullRing tie down?

asked by: JT

0

Expert Reply:

Hi JT,

Each BullRing Truck Bed Side Wall Anchor # BU83FR has a 1,000lb capacity. That being said the bed wall would likely not have that same capacity so you'd need to check with Chevy/GM to determine what that capacity is. If you have any other questions just let me know in the comments below and I'd be happy to help.

expert reply by: Kevin C

0

Jon G.

10/30/2025

Hey JT, were you able to find out the load capacity for your Chevy’s bed wall? Knowing what you learned could help others figure out how much weight their BullRing anchors can safely handle.

Answer 1

Hey Mark, Yep, they sure do; I can confirm for you the retractable BullRing Truck Bed Side Wall Anchors #BU83FR are a fit for your 2024 GMC Sierra 3500.

view full answer...

Answer 2

Thanks for reaching out! We do have some clean looking tie-down anchors you can install in the bed of your 2023 GMC Sierra 2500; the BullRing Retractable Tie-Down Anchors which come in a 4-Pack #BU23FR or 9-Pack #BU83FR depending on what you're…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 10

Hey Rick, yes you can just swap out the shank that you have now for one that is designed for a 2-1/2 inch hitch like the Blue Ox part #BXW4028. You probably already know this but you'll most likely need different spring bar tension on the new…

view full answer...

Answer 11

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 12

Hey Jim. Thanks for reaching out. The 3312022.000 control board you’re looking for is no longer available from Dometic. There may still be some sellers online that have it in stock, but we’re unable to get it directly from Dometic anymore. Since RV…

view full answer...

Load Rating Per BullRing Truck Bed Side Wall Anchor

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching