Total Weight of Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Black Aluminum AM02 Wheel

Question

Question:

Hi. Whats the total weight of wheel+tire? Thanks!

asked by: Dennis

0

Expert Reply:

Hey Dennis, thanks for reaching out!

The Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Black Aluminum AM02 Wheel # KE86EV weight in at 31 lbs.

Are you trying to figure out how much tongue weight this will add as a spare?

expert reply by: Jon G

0

Dennis

1/25/2025

Thanks Jon, No, i'm trying to find the lightest possible tire/wheel combination for an ultra-light trailer that im building. I wanted to see if this rim/tire combo, being aluminum, would be lighter than the skinny 8" (x 3-3/4") steel rims that you're selling. Looks like it's not.

Jon G.

1/25/2025

@Dennis I think the reason why it weighs about the same is that the aluminum wheel has a fancier design and I'm guessing more material. Since they all weigh the same are in the same ballpark pricewise, I recommend going with the aluminum because it has much better corrosion resistance than the standard steel alternatives.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 4

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Total Weight of Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Black Aluminum AM02 Wheel

Product Page this Question was Asked From

Continue Researching