How to Add Additional 4-Way for Tailgate Light Bar on 2024 Nissan Frontier

Updated 11/17/2025 | Published 12/20/2024

Products Featured in This Question

Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector

(1815)

$86.90

Question:

I have a universal tailgate light bar that will go on a 2024 Nissan frontier. my 7 pin and 4 pin say polleck brand not uscar. was looking for a 7 pin to 4 pin easy connect plug and play harness connector with a separate reverse wire. where I bought the lite strip did not know if the uscar brand would work. they said to hard wire but I hoped for a plug in PLEASE HELP

asked by: Alan A

Expert Reply:

Hi Alan; Pollak is just a brand and the US Car connector is a style of connector. Pollak uses this style on their OEM connectors, the only question is whether or not you can remove the plug from the back of the connector on your 2024 Nissan Frontier. If you can pull it from the back of the connector it should look like the picture below.

Assuming you can, you could add the # 118384 in line for an extra 4-way for your light bar. However, a 4-way doesn't have a reverse light circuit. If you can't remove it then the only option is to splice in the # C59236 separately to add a 4-way for the light bar. I'm not sure what you need the separate reverse wire for but the only thing like that would be a 5-way which I don't think your tailgate light bar would have.

expert reply by: Robin H

US Car Connector
(click to enlarge)

Robin H.

11/17/2025

Hey Alan, how did things go with wiring the light bar on your Frontier using the harness options we talked about? Your update could make it easier for others trying to add a similar setup.