Is The Replacement Tarp EX92635-20 For A Long Bed Truck?

Question

Question:

Is this for a long bed?

asked by: Dave

0

Expert Reply:

Hey Dave, thanks for reaching out. The Replacement Tarp # EX92635-20 you mentioned is for the Extang Trifecta 2.0 Soft Tonneau Cover # EX92635. This cover is for the following vehicles:

1994 - 2010 Mazda B Series Pickup 7 Foot Bed
1983 - 2012 Ford Ranger 7 Foot Bed

If you are needing a replacement cover for your tonneau, let me know the year, make, model and bed length of your truck as well as the brand, model number and serial number from your cover and I am happy to look into it.

expert reply by: Jesse M

0

Dave

12/18/2024

06 f350 long bed

Jesse M.

12/18/2024

@Dave Great. Then what about your tonneau cover? Is it the Extang Trifecta 2.0 Soft Folding Tonneau Cover # EX92725? If so, the correct replacement tarp is the following: - Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover - Ford F-250 and F-350 - 8' Beds # EX92725-20

Dave

12/18/2024

@JesseM how much?

Jesse M.

12/18/2024

@Dave Just click the part number # EX92725-20 and it will take you to the page where you can see our current pricing.

Answer 1

There are two factors in determining which replacement tarp you need. The first is the size of your 2012 Toyota Tacoma's truck. The Extang Trifecta was made for the 5 foot bed and the 6 foot bed. The second factor is if you have the standard…

view full answer...

Answer 2

If the tarp of your Extang cover is canvas then you have the Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas #EX94915 and would need the Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover - Black #EX72VR. This will…

view full answer...

Answer 3

Hello Greg, thanks for reaching out. The #EX92915-20 Replacement Tarp is for the Extang Trifecta 2.0 Soft Tonneau Cover part #EX92915. This is for a 2005-2015 Toyota Tacoma with the 6' bed. So if the #EX92915 cover is what you have, the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hi Steve; the factory hitch on the 2013 Tacoma has the bumper brackets integrated into the hitch. You can replace it with the etrailer Trailer Hitch #e98850 but you will have to remove the old hitch and find new bumper brackets to complete the…

view full answer...

Answer 8

Yes, it does John. The OBD2 is the diagnostics port that repair shops and inspection places use to connect to your 2012 Tacoma's computer. The electric brake control harness on your 2012 Toyota Tacoma will be located underneath the drivers side…

view full answer...

Answer 9

The aftermarket hitches for a 2011 Toyota Tacoma don't fit alongside the factory installed hitch; some trucks have hitches you can add on to OEM hitches that fit underneath the original. So I can't see any reason why you wouldn't be able…

view full answer...

Is The Replacement Tarp EX92635-20 For A Long Bed Truck?

Products Featured in This Question

Continue Researching