Replacement Hub and Drum Assembly With 5 on 5 Bolt Pattern for 3,500 lb Rockwell American Axle
Updated 12/15/2025 | Published 11/24/2024
Products Featured in This Question
Question:
Ive got a small camp trailer with the 3.5k Rockwell American axle with brakes. I want to change the hub bolt pattern to 5x5. Will this product fit my application? Part Number: AKHD-550-35-K Thanks
asked by: Kevin
0
Expert Reply:
Hi Kevin; the Trailer Hub and Drum Assembly # AKHD-550-35-K uses the standard # L68149 inner and # L44649 outer bearing combination for 3,500 lb axles. More than likely it will fit your Rockwell American axle but I recommend double checking your bearings first just to be sure.
expert reply by:
Robin H
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Coghlan's Adjustable Hammock Straps Review
- Search Results: hitch pin
- Search Results: dexter trailer hubs and drums
- Search Results: 171255tb
- Search Results: 84 spindle l44649/l68149 bearings 10~19 double lip seal
- Search Results: bearing kits
- Search Results: drum brake pads
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-3/4
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 5-1/2 - Pre-Greased
- Q&A: Replacement Trailer Hub for Hub Marked 8-247
- Q&A: Parts Needed To Add Electric Trailer Brakes To Rockwell American 3500lb Axle On 5 x 10 Tear Camper
- Q&A: Hub Assemblies For 3500 lb Axle On Tandem Axle Car Hauler 16 Foot
- Shop: Curt Rubber Tube Cover - 2"
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Q&A: Replacement Brake Assemblies for Dexter 3,500 lb Trailer Axle
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Will Adding Trailer Brakes to One Axle of a Trailer Make the Wheels Stick Out Further
- Article: Trailer Lighting Requirements
- Article: How to Change the Axle on your Boat Trailer Without Leaving your Driveway
Robin H.
12/15/2025
Hey Kevin, did the hub and drum assembly end up fitting your Rockwell American axle after checking the bearings? Your update could make it easier for others working with the same 3.5k setup.