Can Weigh Safe Anti-Rattle Reducer Sleeve be Used with Weight Distribution

Question

Question:

Will this work with the Weigh Safe Middle Weight Distribution hitch

asked by: Tony L

0

Expert Reply:

Hey Tony, yes you can use the Weigh Safe Anti-Rattle Reducer Sleeve part # WS79ZR with a weight distribution system like your Weigh Safe.

expert reply by: Jameson C

0

Jameson C.

12/15/2025

Hey Tony, how did things go using the anti-rattle reducer sleeve with your Weigh Safe weight distribution hitch? Knowing how it performed could help others looking to quiet their setups.

Answer 1

Hey Darrell, what we need to know to pick out replacement leaf springs is the length of the leaf springs and the axle capacity. If you can get me that info we can see what you'd need.

view full answer...

Answer 2

Hello Lyn; I can definitely point you in the right direction of a new shackle kit and leaf springs for your 2019 Grand Design Imagine 2500RL. The 2-1/4" long shackles are pretty common and for that I recommend the MORryde Suspension Upgrade Kit…

view full answer...

Answer 3

The Ultra-Fab Ultra Scissor Jacks #UF48-979002 will replace the standard 24" jacks that come on your 2018 Grand Design Imagine 2150RB travel trailer. If you find that the jacks are constantly needing blocks to make up the additional height to…

view full answer...

Answer 4

Actually, the Fastway e2 #FA92-00-1000 weight distribution system you'd looked at would be perfect for the travel trailer you described. It's compatible with trailers with tongue weights from 600-1000 lbs. Since your dry tongue weight is 500…

view full answer...

Answer 5

The CRE3000 is a great kit but I would need to verify the axle capacity of your trailer as well as the distance between your axle centers to recommend what would be your best option.

view full answer...

Answer 6

Grand Design lists an 86-1/2" 3,500 lb axle for your Imagine 2150RB. The next size up would be a 5,200 lb axle like the #e45GR. This has the same 86-1/2" hub face measurement but the spring seat is different. You will need to cut off the…

view full answer...

Answer 7

Your 2017 Grand Design Imagine 2150RB does in fact have a 35" wheelbase so the correct MORryde CRE3000 is the #MR27ZR. Unfortunately, Grand Design doesn't list the shackle length but I believe what you have is 2-1/4". This measurement…

view full answer...

Answer 8

The best option we have is the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW - Without Shank #FA94-00-1033 which measures 5" from the center of the ball hole to the center of the shank mounting holes, and then…

view full answer...

Answer 9

Hey there Layla! There are a few different forms of weight distribution hitches, but the majority of the systems that have sway control use friction bars, which work similar to brake pads on your vehicle. This works really well, but it can sometimes…

view full answer...

Answer 10

Hello Brandon, Congrats on the new camper! When picking out the right weight distribution hitch it is most important to be as close to the tongue weight as possible. You said that your tongue weight is around 700 pounds, I am not sure if you are…

view full answer...

Answer 11

The combined load of your 4 tires and wheels just needs to match or exceed the loaded weight of your trailer minus its tongue weight. If your trailer will weigh 3 tons (6,000 pounds) I recommend getting trailer tires that have a maximum load of at…

view full answer...

Answer 12

For your 2015 Ford F-150 with the 3.5 liter EcoBoost the block heater you'd want is the part #KH11815. The other options are ether injection kits which are a totally different animal that I would not recommend for a newer vehicle like yours.

view full answer...

Can Weigh Safe Anti-Rattle Reducer Sleeve be Used with Weight Distribution

Product Page this Question was Asked From

Continue Researching