Recommended Weight Distribution Hitch That Measures 11.5 Center of Ball Hole To Center of Hitch Pin

Updated 03/21/2021 | Published 03/17/2021

Products Featured in This Question

Fastway e2 Weight Distribution w/ Sway Control - No Shank - Round - 10,000 lbs GTW. 1,000 lbs TW

(22)

$395.84

2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs

(2621)

$22.89

2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000

(3870)

$21.41

Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs

(28)

$164.98

Question:

Hi Am looking for weight distribution hitch with locking pin hole to ball center length not more than 11.5 As thats what mercedes recommend for my vehicle its a 2012 gl350 Can i know if there is one that meets those requirements ? Thanks

asked by: AG

Expert Reply:

The best option we have is the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW - Without Shank # FA94-00-1033 which measures 5" from the center of the ball hole to the center of the shank mounting holes, and then using the Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches # AMAC1 which measures 6-3/4" from the center of the hitch pin hole to the center of the shank holes.

This option will give you right at 11-3/4" and which is the closest option to the 11.5" you mentioned.

Keep in mind you will need to verify the total tongue weight of your setup to make sure this system is rated properly for you. Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your 2012 Mercedes-Benz GL350. The easiest way to get an accurate tongue weight measurement is with a tongue weight scale like the # e99044 but there are other ways which are outlined in the included help article.

The # FA94-00-1033 works with total tongue weights ranging from 600-1000lbs so if this matches your total tongue weight this would be a great option for you. You will also need 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286 to match the coupler on your trailer.

I included videos of the products mentioned for you to take a look at.