Recommended Axle Lift Kit for a # 10 Torsion Axle

Question

Question:

My trailer has a Dexter torsion axel p-15 SN D 6327757 what lift blocks do I need the bolts measure 8 inches on center

asked by: Vance S

0

Expert Reply:

Thanks for the information! Since your torsion axles have 8" bolt hole centers you'll need the Torflex Lift Kit item # K71-707-02. These lifting blocks are for #10 torsion axles and will give you a 2-5/8" lift.

expert reply by: Jerred H

0

Jerred H.

12/22/2025

Hey, how did the Torflex lift kit work out on your trailer with the Dexter torsion axle? It’d be great to hear if the 2-5/8 inch lift gave you the clearance you needed. Your update could make it easier for the next person with the same setup.

Answer 1

If you have a #10 Torflex axle on your trailer the correct lift is the part #K71-707-01 which will give you 2-5/8 inches of additional lift. Does your trailer frame have the vertical brackets for the side mount like what you see in the picture? You…

view full answer...

Answer 2

Hey Lee, Kenda tires like the #KE28KV are made in factories in either Taiwan, China, Vietnam, or Indonesia. There are markings on each tire indicating which facility they were manufactured at but to read the coding you would need to reach out to…

view full answer...

Answer 3

You need to use the Torflex Lift Kit #K71-707-02 since your 2020 Haulmark enclosed trailer has the tandem Dexter #10 Torflex axles. The Lippert Axle Riser Kit #LC382741 you found is only rated for Lippert's square torsion axles. While I do see…

view full answer...

Answer 4

Hi Michael; the Escape 17B uses a Dexter Torflex axle but you will have to identify which one. This can be found on the axle tag. Once you have identified the axle you can choose from the following: -Torflex Lift Kit #K71-723-01 (#9 Torflex with…

view full answer...

Answer 5

It's ok if you have 2,200 lb axles; so long as you have a #10 Dexter Torflex Axle the correct lift kit is the following: - Torflex Lift Kit - Tandem Axle #K71-707-02

view full answer...

Answer 6

I do have options for you to lift a 1999 Aluma Utility Trailer but the only bolt-on lift kits for this trailer that could potentially work are Torflex Lift Kits. That said, you would need to make sure you have a Dexter Torflex Axle which can be…

view full answer...

Answer 7

I can absolutely confirm the correct lift kit for your trailer. Based on your photos, you do in fact have a #10 Torflex axle, and they are compatible with the lift kits because you do not have 3" high-profile brackets (which just means the…

view full answer...

Answer 8

Based on the info you listed the correct lift kit for your Lippert torsion 3,500 lb axle is the part #LC270682 which will give you a lift of 2-5/8 inches.

view full answer...

Answer 9

For your 3,500 lb Dexter Torsion axles, you will want to use the Torflex Lift Kit - Tandem Axle - 2-5/8" Lift #K71-707-02. This will provide an additional 2-5/8" clearance. The distance between the mounting bolts is 8 inches center on…

view full answer...

Answer 10

Hey Mark, yes the Torflex lift kit part #K71-707-02 that you referenced would be the correct lift kit to use for your trailer. What you have is the #10 axle based on the capacity so this is correct fit and will give you a lift of 2-5/8 inches. Are…

view full answer...

Answer 11

Since you have a 5,200 lb Dexter Torflex tandem axle setup the correct lift kit is the part #K71-724-02. This will give you a 2-7/8 inch lift and would work well.

view full answer...

Answer 12

Since the sticker on your trailer axle says Dexter Number 10 that means the lift kit part #K71-707-02 is a confirmed fit and would give you an additional 2-5/8 inches of lift. This is the biggest lift we offer for your trailer/axle setup. I attached…

view full answer...

Recommended Axle Lift Kit for a # 10 Torsion Axle

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching