Inner Dimensions of Inno Gear Case 720 Rooftop Cargo Box

Question

Question:

Hello, could you please provide the interior and exterior dimensions of the Inno Gear Case 720? I see one set of dimensions on the product page but was not sure whether this was exterior or interior. Thanks

asked by: Eric

0

Expert Reply:

Hi Eric,

The 72-7/8" long x 34-1/4" wide x 12" tall dimensions are the outside dimensions of the Inno Gear Case 720 Rooftop Cargo Box # IN94YV.

The inner dimensions of the # IN94YV are 65-3/4" long x 30-1/4" wide x 11-1/2" tall.

expert reply by: Kyle S

0

Inner Dimensions of Inno Gear Case 720 Cargo Box
(click to enlarge)

Dude

12/24/2024

Is the difference between the inner and outer length really over 7 inches? Can you please measure those dimensions?

Jon G.

12/24/2024

@Dude Thanks for checking in! Kyle's numbers are correct, but the placement of his arrows is a little off in the photo he made. Th numbers are based off of the video I'm linking (start at 4:40 minute marker) and in this video Evangeline measures from the inner portion of each of the hinges/lifts as opposed to the case. So that 7" different is really the thickness of the shell as well as the thickness of each hinge/lift.

Helpful Links

tv-review-inno-gear-case-720-roof-cargo-box-in94yv.aspx

Answer 1

Hey Mike, do you need the clamps to fit between the lips on the bottom side of your box that are spaced 33.5 inches apart? If so the clamps of the #IN95SV would work for that as the clamps are right at 30 inches apart.

view full answer...

Answer 2

Hey Rrr, in reality you can't really get away from wind noise with roof cargo box. If you install the Inno Gear Case 720 Rooftop Cargo Box #IN94YV it's going to create noise whether it's on a Slimline style rack or a 2 bar roof rack.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

Hey Jon, thanks for reaching out. The etrailer Trailer Hitch Receiver #e98855 for the Honda Odyssey is absolutely compatible with bike racks. As long as the bike rack fits a 2" receiver, and as long as the weight of the rack and bikes does not…

view full answer...

Answer 10

You will get signifcantly less clearance issues if you go with the EcoHitch Hidden Trailer Hitch item #306-X7372 over the etrailer Hitch item #e98855. I have attached some pictures below that will better show this but the main thing you are getting…

view full answer...

Answer 11

Hi Taylor, Welcome to the bike rack world! A little movement is normal with most hitch mounted bike racks, but the Hollywood Destination 2 part #HLY94FR is designed with an anti rattle hitch pin, so it shouldn't have excessive side to side play…

view full answer...

Inner Dimensions of Inno Gear Case 720 Rooftop Cargo Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching