Will Hitch Mounted Bike Rack Interfere With Sensors on Rear Bumper for 2023 Sprinter
Updated 12/22/2025 | Published 10/07/2024
Products Featured in This Question
Question:
I've got a 2023 Sprinter with the sensors built into the bumper - will the rack obstruct / trigger them?
asked by: Matt
Expert Reply:
Hello Matt; the Kuat NV 2.0 Base Bike Rack for 2 Bikes # BA22B may obstruct the sensors in your rear bumper but it will depend on your hitch. The bike rack has a built-in 3-1/2" rise from the shank so depending on where the receiver sits it may clear the sensors. Realistically, I would expect this and any other hitch mounted bike rack to get picked up by sensors even if it sits slightly above.
If you have a tow mode or some other way to shut off the sensors that is one solution. If you don't and you find it is blocking the sensors in the bumper you could always add in the Patriot Hitches # PH54FR. This adapter is adjustable and can provide you with up to 11" of additional rise. It also won't cut the capacity of the hitch by 50% like other adapters.
Product Page this Question was Asked From
Kuat NV 2.0 Base Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Matte Black
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Tilt-Away Rack
- Wheel Mount
- Bike and Hitch Lock
- 2 Bikes
- Class 3
- Fits 2 Inch Hitch
- Carbon Fiber Bikes
- Electric Bikes
- Fat Tire Bikes
- Heavy Bikes
- Kuat
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: 7-Way to 4-Way/5-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs
- Shop: Yakima EasyRider Double Decker Trailer - 14-1/2' Long - 78" HD Crossbars - 500 lbs
- Shop: Curt Auxiliary LED Indicator Lights
- Shop: Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Gunmetal Gray
- Shop: Trail Doc for Kuat NV 2.0 Base Platform Rack - Aluminum - Matte Black
- Shop: Kuat NV 2.0 Base Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Matte Black
- Shop: Kuat NV 2.0 Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount - Gunmetal Gray
- Video: The Low-Down on the Curt Auxiliary LED Indicator Lights
- Video: Review of the Trail Doc for Kuat NV 2.0 Base Platform Rack
- Video: 2024 Jeep Wrangler 4xe Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks: Complete Installation
- Video: Kuat Bike Racks Manufacturer Comparison
- Video: Kuat NV 2.0 2-Bike Platform Rack Test Course
- Video: Curt 7-Way to 4-Way/5-Way Trailer Adapter Review
- Video: Test Fit: Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks on a 2019 Toyota RAV4
- Search Results: kuat hitch bike racks
- Q&A: Can I Install A Kuat NV2.0 On My 2020 Mercedes Sprinter 2500
- Q&A: Troubleshooting A Sprinter Back Up Sensor That Alarms When A Bike Rack Is Attached
- Q&A: Flat Tow Wiring and Trailer Wiring for a Jeep Grand Cherokee 2024 XE Hybrid
- Article: Best Bike Racks for Electric Bikes
- Q&A: What's the Difference Between the Kuat NV 2.0 2-Bike Rack and the Kuat NV 2.0 Base Bike Rake
- Q&A: Can the Kuat NV # BA22B Be Used on Bikes With Front Fenders
- Q&A: Recommended Trailer Hitch, Wiring and Brake Controller for a 2023 Jeep Cherokee L W/ "B" Prep Group
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Best Bike Racks for Fat Bikes
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Installation Tips
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
on Hitch Bike Racks
Robin H.
12/22/2025
Hey Matt, how did things go with the Kuat NV 2.0 Base rack and your Sprinter’s bumper sensors? Did the built-in rise give enough clearance, or did you end up using the Patriot Hitches adapter? Your update could help others working with similar sensor setups.