Can The Fusion LED Combination Tail Light Bar Be Installed On The Back Of A Trailer?

Question

Question:

Will this product work on the back of a trailer. Rampage SuperBrite LED Tailgate Light Bar - Stop, Tail, Turn - 4-Pole Flat - 60 Long If not do you have anything of the same length that would work. Thanks

asked by: Brian T

0

Expert Reply:

Hello Brian, thanks for getting in touch. The Fusion LED Combination Tail Light Bar # STL264RB can absolutely be used on the back of a trailer. It has all of the necessary stop, tail, turn and backup light functions you will need. This light is intended to go on the back of a truck or trailer.

expert reply by: Jesse M

0

Brian

10/4/2024

Thanks for your reply. But the product that you referenced is not the product I asked about

Jesse M.

10/7/2024

@Brian Oh I see. Sorry about that. The Rampage SuperBrite LED Tailgate Light Bar # RA960134 can also be used on a trailer. It is designed for a truck tailgate, but it can absolutely be used on a trailer as long as it fits.

Answer 1

We do indeed have a four-wire version of the Thinline LED Trailer Tail Light #STL64RB. All four-wire trailer lights are for stop, turn, tail, and backup lights, so that portion of the light is obviously going to have a clear lens (as do all four-wire…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Can The Fusion LED Combination Tail Light Bar Be Installed On The Back Of A Trailer?

Product Page this Question was Asked From

Continue Researching