Is a Mounting Kit Needed to Install 4-Leaf Double Eye Leaf Springs
Updated 01/05/2026 | Published 09/23/2024
Products Featured in This Question
Question:
Grand Design 2021 Imagine Trailer 2250RK Looking to replace our Leaf Springs Dexter Part 072-042-00 What else will I need to install these left springs? Hanger kit? Can you send me the links to anything else that I may need.
asked by: Linda K
Expert Reply:
Linda yes, you are going to also need a hanger kit like the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs # APT9 to install the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles # DX23CR you'll just need to let me know what size hangers you have, what your shackle straps measure, and the measurements for your equalizers.
From here, I'd be happy to look for a kit that matches what you need.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3500 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Search Results: trailer axles
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: trailer tires
- Q&A: Availability of 3,500 lb Axle Leaf Spring that is 25-1/4 inch
- Search Results: axle
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Search Results: trailer tires and wheels
- Search Results: trailer wheels
- Search Results: equalizer upgrade kit
- Search Results: trailer leaf springs
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Shop: 3-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 23-1/8" Long
- Q&A: Can A 25-1/2" Long Leaf Spring Be Replaced With a 25-1/4" Long Spring?
- Q&A: Determining Correct Length Replacement Leaf Spring
- Q&A: How to Determine Replacement Leaf Springs for Cruiser Radiance Touring 26VSB
- Q&A: Hanger Kit Recommendation for Dexter 3.5K 4-Leaf Double-Eye Spring
- Q&A: Replacement For 24 Inch 3,500 lb Leaf Springs & Equalizer Upgrade
- Shop: Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 6,000 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Article: Trailer Tire Sizing
- Q&A: Replacement Leaf Springs For A Tandem Axle Trailer With Flattened Leaf Springs
- Video: All You Need to Know About the Dexter Trailer Springs Over-Under Conversion Kit
- Video: Hands-On with the etrailer Hub Bearing Kit
- Video: Let’s Check Out the Dexter Electric Trailer Brake Assembly
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Video: What to Know About the Lippert Tandem Axle Equa-Flex AP Kit
- Video: Breaking Down the MORryde Suspension Upgrade Kit for Tandem Axle Trailers
- Video: Detailed Breakdown of the Shackle Strap
Jameson C.
1/5/2026
Hey Linda, were you able to get the right measurements for your hangers, shackle straps, and equalizers on your Imagine trailer? Once you had those, did the hanger kit end up being a good match for your new leaf springs? Your update could make it easier for the next person doing the same replacement.