How to Determine Replacement Leaf Springs for Cruiser Radiance Touring 26VSB

Updated 01/19/2026 | Published 08/08/2024

Products Featured in This Question

4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long

(2086)

$49.67

4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long

(282)

$90.17

Question:

I have a Cruiser Radiance Touring. 26VSB. It has 2 3500 lb Dexter axles. Do I need the DX23CR spring or E54SR spring. What is the difference? Are they made in the USA?

asked by: Troy O

Expert Reply:

Hi Troy; the # DX23CR is 25-1/4" long and the # e54SR is 25-1/8" long. That is really the main difference. The capacity is the same and both are 4-leaf double eye springs. Neither of them are made in the USA. However, I can't tell which spring you need for your Cruiser Radiance Touring 26VSB until you measure your existing leaf springs. It may be neither of these if they don't match what you have now.

Since leaf springs flatten out over time with use I recommend taking the flat measurement. I attached a help article below which explains how to measure for your reference. Once you have this measurement below you can reply in the comments below and I will help you find the best replacement.

expert reply by: Robin H

Robin H.

1/19/2026

Hey Troy, were you able to measure the leaf springs on your Cruiser Radiance Touring 26VSB to see which one matches? Once you have that flat measurement, I can help confirm the best fit. Let me know what you find so we can narrow it down.