Replacement Motor for a 4100 Model Vent on a 2016 Fleetwood Bounder

Question

Question:

i need to replace the motor for overhead ceiling vent fan in a 2016 fleetwood bounder help?

asked by: Timothy J

0

Expert Reply:

Hey Timothy,

What ceiling vent fan do you have? We have a variety of replacement vent motors on our site, but I unfortunately don't know what you have on your 2016 Fleetwood Bounder. If you can locate the sticker on the underside of it that say the make and model then let me know what you found I'd be more than happy to help you figure this out!

expert reply by: Jon G

0

Timothy H.

9/21/2024

hi jon the model # is 4100 it runs for a while, then stops. im assuming its the motor. thanks

Jon G.

9/21/2024

@TimothyH I'm guessing you mean a Dometic/Fan-Tastic Fan Vent model 4100. In this case you'll need the part # FVK8017-00 which comes with both the fan and the motor. The motor itself isn't replaceable which is why you also need the fan.

Timothy

9/22/2024

@JonG ok thanks do you carry that part, and what is the price? thanks

Jon G.

9/23/2024

@Timothy Yes, the hyperlinked part number I posted in the comment will take you to the product page where you can see current pricing and purchase it from there as well.

Answer 1

According to my research the Replacement Lift Arm for Fan-Tastic Vent Roof Vents #FVK8011-05 should be what you're looking for. Attached is a review video for you to check out.

view full answer...

Answer 2

Hey Randy, It is definitely possible that with the replacement of the lift motor to part #FVK6010-80 that it wasn't tightened up exactly the same as the previous motor, causing the gears to not engage. You'd have to take a look at the…

view full answer...

Answer 3

You're looking for the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts - Off White #FVK6010-80, which is the 17-rpm motor that was originally used in newer vents in coaches after 2014. They used the old…

view full answer...

Answer 4

Yes, either the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-81 or the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-80 will work great as a…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

Hello Bruce, Thanks for writing in! Using butyl tape between the trailer body and the Single Axle Jeep Style Trailer Fender - Diamond Plate Aluminum - 13" to 15" #HP96VR is exactly the route I would go. It stays flexible, creates an…

view full answer...

Answer 10

It looks like you're already in great shape because you have the three major components needed for flat towing: the etrailer Invisible Base Plate Kit part #e98948, the Blue Ox Patriot Portable Flat Tow Brake System part #BLU37TR, and the Blue Ox…

view full answer...

Answer 11

Yes sir, Brian. The Buyers Products LED Light Strip #3375621827 will work with a dimmer switch. I would pair it with the JR Products LED Dimmer Switch #37205-12315, which is designed for 12V DC LED lighting in RVs. The Buyers light only draws 0.41…

view full answer...

Answer 12

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

view full answer...

Replacement Motor for a 4100 Model Vent on a 2016 Fleetwood Bounder

Product Page this Question was Asked From

Continue Researching