Replacement Spring for Power Gear External Spring RV Leveling Jacks

Question

Question:

I also have a spring on the rear of my 99 bounder 34v that is broken and is the same as the photo you are displaying do you have any in stock

asked by: John L

0

Expert Reply:

Hey John, yes we do carry the part # LC359434 and it is available.

expert reply by: Jameson C

0

Jameson C.

1/12/2026

Hey John, did the replacement return spring kit end up working for your Bounder’s leveling jacks? Knowing how it fit could help others dealing with the same issue.

Answer 1

Currently the Replacement Return Spring Kit for Power Gear External Spring RV Leveling Jacks #LC359434 are the only available springs available for the Lippert Power Gear jacks. This spring will fit both 9,000-lb (500082, 500082H, 500082HR, 500272,…

view full answer...

Answer 2

As long as you have good enough access to the jack legs you can leave them installed on your trailer when swapping the springs part #LC359434. I'd recommend putting something under the foot when the spring is off. The top bolt that Conner…

view full answer...

Answer 3

Hey Rob, unfortunately we do not carry any replacement jacks for the Power Gear 500082HR. Since it looks like those jacks have been discontinued, your only real option is to replace the entire system with something like the Lippert Ground Control 3.0…

view full answer...

Answer 4

Sounds like the replacement spring part #LC359434 is what you'd need but you can verify this by comparing your jack to the picture I attached. If the spring you need to replace looks like what's in the attached picture this is the correct…

view full answer...

Answer 5

Yes, you can replace the Replacement Spring Kit for Power Gear Jack part #LC359434 on your Power Gear Jack all by yourself so long as you have basic tools. Basically, you just need to unscrew the top bolt and then unhook the opposite end from the…

view full answer...

Answer 6

No, Gregg I am sorry we do not. Unfortunately the Power Gear 500385 jack is an older obsolete part that has since been upgraded and replaced. The only solution I have for you is to replace the entire system with something like the Lippert Ground…

view full answer...

Answer 7

While we do not have a list of parts that are on each year, make and model of motorhome, if your 1999 Fleetwood Flair has a Power Gear Jack then the Replacement Spring Kit for Power Gear Jack #LC359434 will work. You will need to confirm this is what…

view full answer...

Answer 8

Since you have a Power Gear RV jack the correct replacement spring kit is the part #LC359434 that you referenced.

view full answer...

Answer 9

The Replacement Return Spring Kit #LC359434 only comes with the pieces needed to replace the spring. We don't currently (July 2022) carry the Power Gear RV leveling jacks so you can either try to find that replacement lower leg piece elsewhere or…

view full answer...

Answer 10

The Replacement Return Spring Kit for Power Gear External Spring RV Leveling Jacks #LC359434 is the 500094 spring that you are looking for. The 500094 is an alternate part number for the Replacement Return Spring Kit for Power Gear External Spring RV…

view full answer...

Answer 11

The correct replacement spring for the Power Gear Jack Model 359394 is the Replacement Spring Kit for Power Gear Jack part #LC359434.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Spring for Power Gear External Spring RV Leveling Jacks

Product Page this Question was Asked From

Continue Researching