Recommended Spindle/Hub Combo for a 1,750 lb Axle
Updated 01/12/2026 | Published 08/28/2024
Products Featured in This Question
Question:
Hello! Im an engineer working with a company where we are designing a product that needs a spindle and hub assembly rated at least at 1,750lb. The DM04369 looks to be rated at that. A couple quick questions, is this a full spindle and hub assembly? is the spindle included with this hub? Also, would you guys happen to have any dimensions or drawings for the overall hub and spindle assembly? I know that may need to go back to the original manufacture but needing it to design around it. I know you guys have the bolt hole locations and the flange dimensions. But need other dimensions such as, what size bolts it uses, total height, height of hub and diameter of it, size of lugs on it, etc.
asked by: Stevan R
Expert Reply:
Hey Stevan, the Replacement Hub Assembly # DM04369 is just the hub, so the spindle is not included. This is a replacement part for the Demco Kar Kaddy so it'd use the existing spindle and mounting bolts to install.
For a spindle, the closest it looks like we carry is a 2,000 lb spindle like the BT8 Spindle for 2,000-lb Trailer Axles # TRU94FR. This spindle would work great with the hub # 34822545BX for a 5 on 4 1/2 bolt pattern, or # AKIHUB-440-2-G-1K for a 4 on 4 bolt pattern - Both of these hubs are also rated for 2,000 lbs.
Product Page this Question was Asked From
Replacement Hub Assembly for Demco Kar Kaddy, Tow IT II, or Penske Tow Dolly - Qty 1
- Accessories and Parts
- Trailers
- Tow Dolly Parts
- Hub Assembly
- Demco
more information >
Continue Researching
- Shop: Trailer Hitch
- Video: Setting up the Curt Trailer Hitch Receiver on a 2024 Kia Telluride
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Single Axle Trailer Fender for Enclosed Trailers - Cold Rolled Steel - 8" Wheels - Qty 1
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Search Results: trailer spindles
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Square Drop Leg Stabilizer Jack - 18" Travel - 2,000 lbs - Qty 1
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range C
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Square #84 Spindle for 3,500-lb Trailer Axles: The Breakdown
- Q&A: Trailer Idler Hub with 5 on 4-1/2 Bolt Pattern that Fits a 1 Inch Diameter Straight Spindle
- Q&A: Correct 5-Lug Hub for Square #84 Spindle TRU47FR
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Length Of BT8 Spindle Used With etrailer Easy Grease Trailer Idler Hub Assembly AKIHUB-440-2-EZ-1K
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Replacement Disc Brake Kit Recommendation for 3,500 lb Axle with #84 Spindles
- Q&A: Spindle Recommendation for Trailer Hub with Bearing Dimensions of 1.25 and 1.75 inch
- Search Results: 4 lug hub assembly
Samuel C.
1/12/2026
Hey Stevan, did the 2,000 lb spindle and hub options end up fitting your design needs? Knowing how the dimensions worked out could really help others planning similar setups. Your feedback would be great for anyone designing around these parts.