Will a 8 x 7 Rim Work With a 20 10-8 Tire

Question

Question:

I need a 4 on 4 rim for a 20 10-8 tire. I was looking at the 8x7 would that work?

asked by: Jason H

0

Expert Reply:

Hey Jason, for your 20x10-8 tire yes you can use an 8" x 7" wheel like the Americana # AM20021, which also uses a 4 on 4 bolt pattern.

expert reply by: Bryce D

0

Jason H.

9/5/2024

Thanks! That worked perfectly for what I needed.

Bryce D.

9/5/2024

@JasonH Glad to hear it!

Answer 1

For your 20x10-8 size tire, you can use an 8 inch x 7 inch wheel like the Americana #AM20021 if you have a 4 on 4 inch bolt pattern or #AM20026 if you have a 5 on 4-1/2 inch bolt pattern. Both wheels feature a nice white powder coat to resist…

view full answer...

Answer 2

Most of the trailer tires will have what is called a zero offset. That means that the direct center of the wheel and tire is measured to where the wheel mounts to the hub face. If you remove your tire and wheel and measure from the back edge of your…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 9

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

Answer 12

Kevin, I think you are absolutely making the right call replacing those tires. Even though they still look great on the outside, eight year old trailer tires are getting into the age range where internal deterioration becomes a bigger concern than…

view full answer...

Will a 8 x 7 Rim Work With a 20 10-8 Tire

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching