Replacement Plastic Cover For Ventline Bathroom Exhaust Fan Model VD0434

Question

Question:

I need a replacement plastic cover for a Ventline bathroom exhaust fan model VD0434. Can you please help with a part number? Thanks.

asked by: Don C

0

Expert Reply:

Hello Don. We do offer a replacement plastic cover for your Ventline bathroom exhaust fan model VD0434. The correct lid is the following:

Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - White - Wedge Shape - Plastic # BVD0449-A01

expert reply by: Jesse M

0

Jesse M.

1/27/2026

Hey Don, did the replacement dome assembly for your Ventline bathroom exhaust fan fit the way you needed? Knowing how it worked out could help others trying to match the same model.

Don C.

1/27/2026

@JesseM yes it worked well but I added a weatherstrip to improve the fit when in the closed position.

Jesse M.

1/28/2026

@DonC Ok nice glad to hear the vent lid is working out. Good call with the weatherstrip. Anything you can do to keep water out of the camper is a good idea. Thanks for taking the time to share!

Answer 1

I'm not quite sure what you mean by the "heart", however for your Ventline VD0434 we have the replacement screen frame #BVA0444-32, the replacement lid #BVD0449-A01, and the replacement ceiling garnish #VA0445-28 all available for…

view full answer...

Answer 2

I went and pulled a Ceiling Garnish for Ventline Roof Vent #VA0445-36 to measure the width of the lip that goes over the trailer ceiling and found it to be 1-5/16 inches.

view full answer...

Answer 3

Hey Chris, the closest option to what you are looking for would be the Ventline Ceiling Garnish part #VA0445-28 which is birch white like you asked for and is basically exact same dimensions except is 1/8 of an inch taller.

view full answer...

Answer 4

The direct replacement for your Ventline screen with model number VD0434 is #BVD0434-31 (birch white) or #BVD0434-41 (polar white). This is compatible with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119. However, if you're…

view full answer...

Answer 5

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Plastic Cover For Ventline Bathroom Exhaust Fan Model VD0434

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching