Trailer Hitch to Fit Behind 2020 Dodge Durango Bumper Cover

Question

Question:

I have a 2020 dodge Durango GT plus. I want to install a hitch to pull my cargo trailer. Is there a product that will hide behind the cover plate on the bumper so the hitch is not exposed when not towing? I look forward to your response. Thank you.

asked by: Steven W

0

Expert Reply:

Hey Steven, thanks for reaching out!

You're going to want the Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR for your 2020 Dodge Durango because it sits right behind that cover you're talking about and still allows you to replace the cover when you aren't towing so you can maintain a sleek look on your vehicle.

To tow your trailer you'll also need wiring and a ball mount.

I recommend picking up the Curt T-Connector # C56336 and securing it to the crosstube of the hitch with the Mounting Brackets # 18144 and # C83DR, and then for a ball mount kit I recommend checking out the etrailer Ball Mount w/ Pre-Torqued 2" Ball # e77DR. This ball mount gives you a 4" drop and when paired with the Draw-Tite hitch it will work great for trailers with a 15-1/2" coupler height.

Attached are some videos for you to check out as well as a photo showing the Draw-Tite hitch installed and with/without the cover on a 2020 Durango.

expert reply by: Jon G

0

Draw-Tite Hitch Installed on a 2020 Dodge Durango
(click to enlarge)

Lazer S.

1/27/2026

Hey Steven, how did the Draw-Tite hitch work out on your Durango with the bumper cover in place? It sounds like a clean setup when not towing. Sharing how it turned out could help others looking for the same hidden look.

Steven W.

1/27/2026

@Lazer It works great. The cover hides it perfectly.

Lazer S.

1/28/2026

@StevenW Nice! Glad it's all working well for you! : ) Let us know if there is anything else we can help with!

Stevenw

1/28/2026

@LazerS as far as installation, I would like to add that a special wiring harness was needed, which increased labor time during install. All in for hitch, wiring and labor was about $700. This was at a local garage who I use for everything else so I trusted the process.

See All (4) Replies to Lazer S. ∨

Answer 1

To add a hitch to your 2022 Dodge Durango, I recommend the Draw-Tite item #DT38MR. This hitch is custom fit and bolts to your Durango with included hardware. I really like the Draw-Tite hitch because it installs behind your rear bumper cover and can…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Trailer Hitch to Fit Behind 2020 Dodge Durango Bumper Cover

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching