Review of the etrailer Ball Mount w/ Pre-Torqued 2" Ball Video

Installation of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56225 that fits your 2019 Nissan Frontier (without a factory connector) is very straightforward, but installing a harness on a Nissan does require the use of…

This is a very common issue with newer Nissan vehicles like your 2019 Nissan Frontier. There is a missing relay needed to activate the trailer running light circuit. The running light relay can be installed or replaced with #C57000. One likely place…

Hey Marvin, for your 2019 Nissan Frontier we have direct fit trailer wiring options like with the Curt part #C56226 for a 7-way or the part #C56225 if you need a 4-way. 7-Way connectors are the round ones and 4-ways are the flat ones you see on…

I do have a solution for you, but unfortunately nobody currently (as of January 2019) sells just the harness for the relays out of the T-One Kit #118266 that you referenced. Since you already have the 7-Way wiring and connector the next best thing…

On the 2010 Nissan Frontier, if the vehicle did not come with a factory tow package it will not have a functioning wiring harness even if the Tow Ready Wiring Harness, part #118263, is added. There will be relays that will need to be inserted to make…

Thanks for writing in Steve. For the 2023 Nissan Frontier I recommend our etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98869. The weight capacity of this hitch is 500 pound tongue weight, and a 5,000 pound…

We sure do! I'd recommend the etrailer brand Class III receiver hitch, part #e98869. To complete your towing setup, you'll also need a #C56225 trailer wiring harness to provide a 4 pole connector. For a ball mount, use the #2923 and for a…

We do have some trailer hitch and wiring options for your 2019 BMW X3. For a hitch I recommend using the Draw-Tite Class III #76226 as it fits all models of your X3. Then for wiring you'll need the T-One #TK77FR which tees in behind your tail…

The Draw Tite hitch part #76226 is not known to cause bumper issues on the 2021 BMW X4. I am not sure what Uhaul would have done wrong but it's not a common problem for this hitch.

This Cushioned Ball Mount, part #AMSC4, has a ball mount hole that measures 1 inch in diameter. If you are looking for a ball with a 1 inch shank that also has a 10,000 lb capacity I would recommend the Convert-A-Ball Interchangeable Ball Set, part…

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…