Will a Curt 5th Wheel Hitch Work W/ Reese 5th Wheel Brackets
Updated 01/27/2026 | Published 08/17/2024
Question:
I have a 2006 dodge mega cab. I have reese rails and mounting kit installed in truck. I have a Reese 16k fifthwheel mounted in it. What I need to know is can I use a curt slider with my reese fifthwheel and rails. The rails are standard. Also if I have to use a reese slider will 10 of rear slide be enough. The curt gives me 12 that is why Im considering the curt slider. What is your thoughts on this . Thank you .
asked by: Cory D
Expert Reply:
Hey Cory, so If I'm understanding correctly you just want to use your Curt 5th wheel with your Reese rails? If that's the case, then yes you can, you just have to make sure that your Curt slider uses the standard industry standard connection for 5th wheels (I.e., not for a puck system or special mounting rails).
As far as clearance goes, 10" is plenty, so you'd be fine realistically with either 10 or 12" of clearance.
Product Page this Question was Asked From
Demco Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs
- 5th Wheel Hitch
- Sliding 5th Wheel
- Above Bed Rails
- 4500 lbs Vertical Load
- 18000 lbs GTW
- Double Pivot
- Premium - Single-Hook Jaw
- 16-1/2 - 19-1/4 Inch Tall
- 14 Inch Fore/Aft Travel
- Demco
more information >
Featured Help Information
Instructions
Continue Researching
- Video: How to Install the Curt Trailer Wiring - 2018 GMC Sierra 1500
- Shop: B&W Custom Mounting Brackets for Patriot 5th Wheel Above Bed Base Rails
- Shop: Towing Mirrors
- Shop: Trailer Wiring
- Video: Reese Fifth Wheel Installation Kit RP50081 Review
- Shop: B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long
- Shop: Reese Quick-Install Custom Bracket Kit for 5th Wheel Trailer Hitches
- Shop: B&W Custom Mounting Brackets for Patriot 5th Wheel Above Bed Base Rails
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector and Cover Plate - 7' Long
- Shop: CIPA Custom Towing Mirror - Slip On - Driver Side
- Search Results: 23~478
- Video: Review of B and W Fifth Wheel Installation Kit - Custom - BW59FR
- Q&A: Looking For A Replacement For My Magnetek 6700 Series Model 6720
- Search Results: 008~219~04
- Q&A: Single Step Replacement for ETD 728 Elkhart Tool and Die Step
- Q&A: What is the Purpose of Adjusting the Tilt Angle of the Ball on Some Weight Distribution Systems
- Q&A: Can I Upgrade My E2 Roundbar System With Higher Rated Bars
- Q&A: Availability of Soft Start for Dometic FreshJet 5
- Q&A: Will Dexter Torflex #10 Axle Side Mount Install Kit Work With Flexride 3,500 lb Torsion Axle?
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Search Results: trailer wiring
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Article: How to Measure for Trailer Hitch Drop
on 5th Wheel Hitch
Josh B.
1/27/2026
Hey Cory, how did things turn out with the Curt slider on your Reese rails? Did the extra 2 inches of travel make a noticeable difference in your clearance? Your update could make it easier for others comparing those setups.