Does EcoHitch Stealth Hitch Fit 2024 Tesla Model 3 Highland

Question

Question:

Does part EH84GR fit a 2024 Model 3 Highland car?

asked by: Mike L

0

Expert Reply:

Hey Mike, yes the EcoHitch Stealth Hitch part # EH84GR that you referenced does fit the 2021 Tesla Model 3 Highland.

expert reply by: Jameson C

0

Jameson C.

1/27/2026

Hey Mike, did the EcoHitch Stealth Hitch end up fitting your 2024 Model 3 Highland as expected? Knowing how it worked could help others looking at the same setup.

Mike L.

1/27/2026

@JamesonC The installer had to trim something off. I don't remember what it was but he said it wasn't a problem. Otherwise everything else worked fine installing on my 2024 Highland Model 3.

Answer 1

Hi Jason, I completely understand why you’re asking because the ground clearance on a Model 3 is already pretty minimal, so even a small difference in receiver height can matter when you’re pulling into a steep driveway or going over a ramp. For the…

view full answer...

Answer 2

Hey Jason, Great question. When installing the Oris Hitch #RS49VR on your 2022 Model 3, the factory bumper beam does not get reinstalled. The hitch itself takes its place and is designed to provide the structural support needed. If you’d rather keep…

view full answer...

Answer 3

Hi Brian! The Stealth Hitches Hidden Rack Receiver - Custom Fit - 2" #391TES317 is the premium option for your 2022 Tesla Model 3 and would work very well for you. It has plenty of capacity to carry the RockyMounts GuideRail Bike Rack for 3…

view full answer...

Answer 4

Yes, it does Marcus. Our etrailer item #e33ZR hitch does indeed fit the 2024 Tesla Model 3. We had a customer install one earlier this year on theirs. The etrailer Hitch item #e33ZR is a class III hitch with a 2" receiver. It has a 2,000 lbs…

view full answer...

Answer 5

Hey Josh, I can get your 2024 Tesla Model 3 set up with a hitch, though the #e33ZR you asked about hasn't been confirmed as a fit for the '24 Tesla 3, so we'll need to go a different route. Reason for that is the '24 Model 3 got a bit…

view full answer...

Answer 6

The weight of the EcoHitch part #EH84GR which fits your 2018 Tesla Model 3 is 45 lbs. When not in use you could use the access hole cover part #306-XA2002 which would totally cover up the hole and would give you same aerodynamics as before the hitch…

view full answer...

Answer 7

Hi Denys; you must be referring to the factory reinforcement beam or the base plates. Removing these won't hurt anything and isn't uncommon for a hitch with this design. The instructions for the #391TES317 actually allow for the…

view full answer...

Answer 8

The EcoHitch Stealth Trailer Hitch Receiver part #EH84GR is a fit for the 2020 Tesla Model 3. The EcoHitch is completely hidden behind the bumper and has a removable square receiver tube. The receiver tube unbolts from the cross body of the hitch.…

view full answer...

Answer 9

We do have a few great hidden hitch solutions for your 2022 Tesla Model 3. The most hidden is the Stealth hitch part #391TES317 and the EcoHitch part #EH84GR which have removable lower sections that allow it to be totally hidden when not in use if…

view full answer...

Answer 10

Hello Stewart, thanks for reaching out. The Curt Class 3 Hitch #C45FR weighs 38 lbs by itself.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Does EcoHitch Stealth Hitch Fit 2024 Tesla Model 3 Highland

Product Page this Question was Asked From

Continue Researching